87 roller motor in a ii

Discussion in 'Mustang II' started by stangy_77, Feb 20, 2004.

  1. stangy_77 New Member

    Member Since:
    Feb 18, 2004
    Message Count:
    33
    Likes Received:
    0
    Trophy Points:
    0
    i am putting an 87 roller block in my 77 mustangii and going with a weind stealth intake and 750 holley i was wondering if the ford racing cams e303 or b303 would be alright to use in my block since it will no longer be fuel injected :flag: :hail2: :banana: :shrug:
    stangy_77, Feb 20, 2004
    #1

  2. a351Must2 Windsor II

    Member Since:
    Mar 12, 1999
    Message Count:
    4,319
    Likes Received:
    0
    Trophy Points:
    0
    from what I've read about other people's experience, the E303 would work great...

    The B303 doesn't work well unless you have better flowing heads like at least the GT40 heads. A lot of people have said you actually loose power going to the B303 with stock heads.

    The carb will be happy with either cam...
    a351Must2, Feb 21, 2004
    #2

  3. stangy_77 New Member

    Member Since:
    Feb 18, 2004
    Message Count:
    33
    Likes Received:
    0
    Trophy Points:
    0
    what kinda rpm band can i expect i would like to stay away from a stall
    stangy_77, Feb 22, 2004
    #3

Share This Page