94-95 Cobra Intake, Installation Hardware Needed?

[Swarzkopf]

I just picked up a used 94-95 Cobra intake manifold. It came with no hardware.

I've been searching here for the past hour and cannot find definitive answers.

Can anyone list for me the following information:

Gaskets needed for upper and lower (part numbers please)
Bolt sizes for upper and lower (or bolt kit, if there is one)
Any other specific hardware I'll need (part numbers much appreciated. ).

I'd really appreciate it.

 

[wytstang]

Don't have part #'s but here what you'll need.
1.Gasket paper-I couldn't find a TB gasket local no one got the right one (all to big)
2.EGR-reused old one again could not find one old the fox
3. Just ask for cobra intake gasket set for a 95 (fel-pro)
4.Bolts-Two(2) 5.5 inch bolts, Two(2) 6.0 inch bolts, Two(2) 2.0 inch bolts,
Twelve(12) washers for bolts-according to-http://www.corral.net/forums/showthread.php?t=588357
Or fordracing.com sells the bolt kit
5. New T-stat w/gasket
6. Coolant
*Note* Mark the dizzy/block/rotor location before removing. That way you can just stabb the dizzy back in and fire it right up. To make life easier buy a large S wrench made to remove/tighten the hold down bolt for the dizzy.

 

[Swarzkopf]

Thanks wytstang, I appreciate the help.

Does anyone know the part numbers for the Cobra lower manifold to cylinder head gasket?

 

[Swarzkopf]

Also, does anyone know the lower manifold bolt sizes?

 

[wytstang]

Lower intake reuses the stock bolts, I'm pretty sure the lower gaskets are fel pro 1250

 

[Swarzkopf]

Awesome! Thanks a ton wytstang. I'll probably just use some home depot bolts as mounting studs then.

 

[DarkProphet]

Is it the same hardware as the gt40 upper?

 

[wytstang]

DP-Yep say hardware..

 

[RIO5.0]

If you still have stock heads then The Fel-Pro MS93334 will do fine for the lower...the upper/lower is MS95953..

If I remember right the GT40 bolt kit is like 10.00 and you get the entire set...

 

[DarkProphet]

I ran into a problem today. The GT40 bolt kit has a 30 day wait on it due to my dealer being slow, so thats out of the question. I went to my local bolt supply shop (G&S Fastners) and they dont have the 5/16" bolt in 7". What should I do? does anyone know what size the bolts are for the stock gt manifold?

 

[RIO5.0]

Head to Home Depot or even a local hardware store and get a lenght of Redi-Rod...it come in 3' lenghts...cut the lenghts you need and use nuts to get you buy...
I have a dozen or more intake bolts, including a new GT40 kit I never used, some from an Explorer and my 93 Cobra...If your in a jam give me a shout...

 

[SaltWaterFish]

There are the part numbers I have collected for my cobra install.

These are all Fel-Pro numbers.

95953 upper to lower
60859 TB
70020 EGR (Fox p/n but it will work)

Have not had time to get the others yet.

 

[Swarzkopf]

Thanks guys...I just ordered the following from Summit:

---
ASP-025030 Bracket, Smog Pump Eliminator, Aluminum, Natural, Ford, Mustang, 5.0L, Kit $65.95 1 $65.95


FEL-MS93334 Intake Gaskets, Stock Port, Ford, EFI, 5.0L, Set $15.69 1 $15.69


FEL-MS95953 UPPER SET INTAKE COBRA/GT40 $9.99 1 $9.99


FMS-M-6002-A50 GT40 MANIFOLD BOLT KIT $6.88 1 $6.88

---

 

[DavidNC]

I'm looking for a bolt kit for the explorer intake. Canyou give me the measurments and qty's of each bolt that came with your boltst kit. I do have two of the long bolts, but the rest are missing.

Thanks,
David

Thanks guys...I just ordered the following from Summit:

---
ASP-025030 Bracket, Smog Pump Eliminator, Aluminum, Natural, Ford, Mustang, 5.0L, Kit $65.95 1 $65.95


FEL-MS93334 Intake Gaskets, Stock Port, Ford, EFI, 5.0L, Set $15.69 1 $15.69


FEL-MS95953 UPPER SET INTAKE COBRA/GT40 $9.99 1 $9.99


FMS-M-6002-A50 GT40 MANIFOLD BOLT KIT $6.88 1 $6.88

---

 

[DavidNC]

I'm looking for a bolt kit for the explorer intake. Canyou give me the measurments and qty's of each bolt that came with your boltst kit. I do have two of the long bolts, but the rest are missing.

Thanks,
David

Thanks guys...I just ordered the following from Summit:

---
ASP-025030 Bracket, Smog Pump Eliminator, Aluminum, Natural, Ford, Mustang, 5.0L, Kit $65.95 1 $65.95


FEL-MS93334 Intake Gaskets, Stock Port, Ford, EFI, 5.0L, Set $15.69 1 $15.69


FEL-MS95953 UPPER SET INTAKE COBRA/GT40 $9.99 1 $9.99


FMS-M-6002-A50 GT40 MANIFOLD BOLT KIT $6.88 1 $6.88

---