Automatic shifting problem

Discussion in '1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-' started by gstang117, May 23, 2011.


  1. gstang117

    gstang117 New Member

    Joined:
    May 23, 2011
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    Hello,
    I have got a small problem with my shifting in my 93 lx.
    It's the A4LD transmission with the 2.3l.

    What is happening is from 1st to 2nd you must get the rpms up to 4 and back off to get it to shift. I've changed the module, checked for vacuum and checked the vacuum line which seems to be fine.

    Is there anything else I can do?
    The co-signer on the title wants to sell it, and I'd really hate for it to go for less than its worth because of this problem.
  2. clay07

    clay07 New Member

    Joined:
    Aug 23, 2011
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    sacramento california
    what color is fluid? i've seen alot of times its usually clutch material or metal shavvings in the valve body sticking valves. usually on dodge a 500/518's and 618's,but highly possible thats your issue if its not cherry red

Share This Page