blueprints for a 3v4.6

[corey796]

does any one have blueprints or know were to get blueprints of the 3v4.6 i really want to know the bolt placements and ports were the intake bolts up i work in a machine shop and would like to make a intake adapter that i can bolt a cobra super charger to the 3v but other then pulling the car a part or better a spare motor i dont know were to get the numbers?


does ford manuels go into that kind of detail i dont remember


thanks

 

[hammeron]

i see what you're trying to do...i
have the service manuals and i've
never come across any blue prints.

i know adam at ST Motorsports has
made adapters for the manifold and
maybe he could provide you with the
intake manifold layout.

 

[UrbanRedneck]

Rather than taking one apart or getting a spare engine, I'd get a set of CMCV delete plates and go off that...

 

[corey796]

i really need more numbers like how wide the block is and all that to make a 1 peace

thanks for the answers



or a intake now that i think about it that may get me all my numbers

 

[klaw]

Put the word out in your local area. Someone will have installed a Whipple or Saleen and they'll have their old plastic intake sitting around. You can take exact measurements off that including the dimensions of the o-ring seal seats etc.

 

[o0Dan0o]

The intake takes about 5 minutes to get off, honestly if you have the prowess to make a custom manifold adapter than you should be able to get those numbers in about half an hour.
Dan