bult aode

sn-95matt5-0

Member
Nov 6, 2006
170
0
16
ok i may be putting this in the wrong section but.

can i get some average cost for:

(a) building an aode with performance aode parts to hold up for a while.

(b) complete 4r70w swap

(c) building a aode with 4r70w guts in it

i know prices will vary from place to pace but i was hoping that maybe somebody may have priced some of this stuff or even done it before. i'm wanting prices for everything but the converter, including a good shift kit.

i was thinking of doin an actual 4r70w swap but its not the easiest thing to find in my area.
 
I purchased a built aode for 700hp from someone on this site...I thought he had about 2K into the build...i've got a list of the build somewhere on this site...if you want it let me know and I will search it out......
 
Complete overhaul on AODE, 0 miles on it. Only the best parts installed, made to handle 700 hp. The tranny’s valvebody has shift modifications, upgraded output shaft & Stubby input shaft, and a finned TCI deep oil pan. - $1550


New overhaul parts that went in include:


Overhaul
GASKET AODE/4R70W 92-95
FILTER 4R70W 2WD/4WD 96
AODE/4R TAIL BUSHING
C6 PUMP BUSHING


Inter Clutch
RAYBESTOSE HIGH ENERGY GROOVED (4)
4 PLATE PP


FWD Drum
BLUE FORW (6 Raybestose Blue Racing clutches, better slipping protection than ALTO reds)
FWD STEELS 34T (7)


Reversed Input Drum
SPIRAL SNAPRING
DRUM, AODE / 4R70W Mechanical Diode Update


Direct Drum
BLUE DIR (6)
DIR STAMPED STEEL 34T .07" (7)


SERVO & ACCUMS
2.7" Piston, Overdrive Servo, AODE / 4R70W, Molded rubber
Accumulator Piston, AODE / 4R70W. 2/3, 1994-UP


MISC
DOUBLE SEALED OD SERVO PIN
LUBE TUBE (lubrication modification to lube the tailshaft/yoke and help the bushings live longer)
SUN GEAR BUSHING