cam help 88 2.3

Discussion in '2.3L (N/A & Turbo)' started by Roland69, Jun 24, 2007.

  1. Roland69 Sergeant Tangnet

    Member Since:
    Sep 17, 2005
    Message Count:
    3,102
    Likes Received:
    3
    Trophy Points:
    58
    Location:
    Port Elgin, Ontario
    I sold a 88 2.3 mustang to a guy who turned it into a circle track car and he is trying to get more power. He already switched it to a carbed setup and didn't gain anything. I told him a cam from a Ranger was suppost to help a little. Can anyone tell me what year Ranger cam is the one he needs or reccomend what cam I should tell him to use.
    Roland69, Jun 24, 2007
    #1

  2. sleeper_inc New Member

    Member Since:
    May 4, 2007
    Message Count:
    92
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Regina Beach Sask. Canada
    sleeper_inc, Jun 24, 2007
    #2

  3. Roland69 Sergeant Tangnet

    Member Since:
    Sep 17, 2005
    Message Count:
    3,102
    Likes Received:
    3
    Trophy Points:
    58
    Location:
    Port Elgin, Ontario
    so are the 89-95 ranger and the 91-93 stang cams the same. how much better than a 88 2.3 are they
    Roland69, Jun 24, 2007
    #3

  4. sleeper_inc New Member

    Member Since:
    May 4, 2007
    Message Count:
    92
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Regina Beach Sask. Canada
    They are about the same. The only addvantage you get using them is there is less friction which equals more power, but thats really it
    sleeper_inc, Jun 24, 2007
    #4

  5. Roland69 Sergeant Tangnet

    Member Since:
    Sep 17, 2005
    Message Count:
    3,102
    Likes Received:
    3
    Trophy Points:
    58
    Location:
    Port Elgin, Ontario
    he want's a cheap cam that he can find in a junk yard I think...but one that will gain a little power....any other little things he can do to help in the power department
    Roland69, Jul 3, 2007
    #5

  6. Red_LX Doubt I could be of much help, unless you need por

    Member Since:
    Aug 21, 1998
    Message Count:
    10,498
    Likes Received:
    3
    Trophy Points:
    78
    Location:
    Morgantown, WV...where couches meet their doom
    If the guy is racing circle track and he doesn't know how to make power with the 2.3, he shouldn't be racing it.

    There's no such thing as "cheap" in circle track racing with a 2.3L. He isn't gonna find anything in the junkyard that's gonna help him at all.

    Tell him he better buckle down and open his wallet, because if he wants to make any power at all, he's gotta have the head ported and milled, and have a big cam installed at the very LEAST...along with a good header and some other small items.
    Red_LX, Jul 3, 2007
    #6

  7. Roland69 Sergeant Tangnet

    Member Since:
    Sep 17, 2005
    Message Count:
    3,102
    Likes Received:
    3
    Trophy Points:
    58
    Location:
    Port Elgin, Ontario
    can't do any porting or milling. He isn't afaraid to spend money just the rules say needs to be stock but he can run whatever cam he wants I think... it is already competitive but the little VW's and a few CRX's there that are lighter and can pull away from him. I don't know what gears he is using maby that's part of the problem....He has been into rasing longer than I have been alive (I'm 24 and he has been racing for 57 years) and he is just doing this to get his 2 daughters into the sport.

    his website is here and the mustang I sold him is in there now the current circle track car.
    www.speedysmith.com
    Roland69, Jul 4, 2007
    #7

  8. Red_LX Doubt I could be of much help, unless you need por

    Member Since:
    Aug 21, 1998
    Message Count:
    10,498
    Likes Received:
    3
    Trophy Points:
    78
    Location:
    Morgantown, WV...where couches meet their doom
    Then I dunno, tell him to call Esslinger and talk to them and tell them what he's doing....I'm sure they can make him a recommendation.
    Red_LX, Jul 5, 2007
    #8

Share This Page