cyl number 1 missing

Discussion in '2.3L (N/A & Turbo)' started by Street-Racer, May 13, 2008.

  1. Street-Racer New Member

    Member Since:
    Jun 11, 2007
    Message Count:
    29
    Likes Received:
    0
    Trophy Points:
    0
    ok i ran out of gas on the side of the highway one night got it started drove it to a gas station started running perfect will then i hot rodded the hell out of it for a min then went back to normal speed then i stoped for a stop light and it started missing real bad i thought wtf so i drove it home thought it might be something with the fuel so i replaced a fuel filther (which it needed) then it still didnt run right so i did a fuel pressure test and tested my injectors there all ok so i thought mayb plug and wires just replaced them tonight it didnt help i got spark to bit it still misses i know it the 1cyl starting from the end of the motor the only thing i could think of is mayb i bent a value so i did a compression test it came out ok but mayb it still letting me get compression idk the only mod i have done to the car is a stage 2 Racer walsh cam could anything else cause this?
  2. RustBucket New Member

    Member Since:
    Jun 8, 2003
    Message Count:
    585
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Buford, GA
    What did you find on #1 that tells you it's the one misfiring?
  3. Street-Racer New Member

    Member Since:
    Jun 11, 2007
    Message Count:
    29
    Likes Received:
    0
    Trophy Points:
    0
    bit of gas and i pull the plug off and the idle doesnt change at all just that cyl does it
  4. Street-Racer New Member

    Member Since:
    Jun 11, 2007
    Message Count:
    29
    Likes Received:
    0
    Trophy Points:
    0
    well i dont see it being a Distributor cap either mayb a broke value spring?

Share This Page