Hi everyone! I just installed a set of MAC boomtubes on my 06 stang GT. But the left driver side tip is too high and almost touching the top of the exhaust cutout in my bumper. I have tried moving the over axle pipe where it connects to the H pipe but with no luck. I appreciate any help anyone can provide.
if rotating the o/a pipes at H connection isnt working. you may have to bend the hanger on the muffler but double check everything first. using a torch to heat it will help bend it.
Alright so i figured it out. I was only unbolting the o/a pipe from the h pipe. But, you must unbolt both the axle back from the o/a pipe and the o/a pipe from the h pipe for this to work. That works like a charm.
