UP FOR GRABS:
Stock-"ish" rear bumper off my V6 Mustang.
WHAT YOU GET:
* The Bumper - silver in color. Bottom was sprayed black and trimmed with vinyl pin stripe, letters are sprayed on - not vinyl inserts, "thunder bolt" vinyl design on either side of the lettering.
CONS:
* Scratching on the top from trunk cargo, scratches on the back from where a tree got too close, passenger side has a spot of damage where some ______ at school backed into me (second picture), passenger side bottom has a scuff from where I bottomed out in a buddy's vertical driveway, and the one reflector has a small crack/chip in it.
WHAT YOU'LL NEED:
* Mounting plates to attach it. Use your old ones if need be - drill out the rivets then use new ones to mount the plates on.
FROM:
Pulled off my '02 3.8 when I went with a GT rear.
PRICE:
$75
SHIPPING:
Not available. See below for local pick-up
FREE LOCAL PICK-UP:
I live in Jefferson Township, NJ. This is near Sparta, West Milford, Rockaway (Mall is about 15 mins away), and Lake Hopatcong.
FITS:
Any 99-04 New Edge Mustang. Direct bolt on for V6's and Cobra R's. Bullitt, GT, plain Cobra, and all other models with dual tailpipes will require exhaust modifications.
CONTACT:
Please let me know if you're interested.
Thanks for looking
-Andy
Stock-"ish" rear bumper off my V6 Mustang.
WHAT YOU GET:
* The Bumper - silver in color. Bottom was sprayed black and trimmed with vinyl pin stripe, letters are sprayed on - not vinyl inserts, "thunder bolt" vinyl design on either side of the lettering.
CONS:
* Scratching on the top from trunk cargo, scratches on the back from where a tree got too close, passenger side has a spot of damage where some ______ at school backed into me (second picture), passenger side bottom has a scuff from where I bottomed out in a buddy's vertical driveway, and the one reflector has a small crack/chip in it.
WHAT YOU'LL NEED:
* Mounting plates to attach it. Use your old ones if need be - drill out the rivets then use new ones to mount the plates on.
FROM:
Pulled off my '02 3.8 when I went with a GT rear.
PRICE:
$75
SHIPPING:
Not available. See below for local pick-up
FREE LOCAL PICK-UP:
I live in Jefferson Township, NJ. This is near Sparta, West Milford, Rockaway (Mall is about 15 mins away), and Lake Hopatcong.
FITS:
Any 99-04 New Edge Mustang. Direct bolt on for V6's and Cobra R's. Bullitt, GT, plain Cobra, and all other models with dual tailpipes will require exhaust modifications.
CONTACT:
Please let me know if you're interested.
Thanks for looking
-Andy
