GT40 Intake Adaptability

Discussion in 'Fox 5.0 Mustang Tech' started by bennettracing, Aug 20, 2006.

  1. bennettracing Founding Member

    Member Since:
    Aug 27, 2002
    Message Count:
    279
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ava, MO
    Either I've got off the wall questions or I really suck at the search function...

    I'm considering getting some GT40 heads, or perhaps even GT40P's. I know that the GT40P's take a slightly different header, but was wondering if there is any difference on the intake side of things between E7's or the GT40/GT40P.

    Also, somewhat relevant, but different question, I'm building a carbed 5.0, which 4bbl intake would you recommend for a somewhat budget build?
    bennettracing, Aug 20, 2006
    #1

  2. Tonys96Cobra professional deer "mounter"

    Member Since:
    Oct 28, 2005
    Message Count:
    673
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Syracuse
    There is no real difference on the intake side. Just get the lower gasket for a Cobra, and the ports will match right up.
    Tonys96Cobra, Aug 20, 2006
    #2


    Sponsored Ad

  3. 95GTAODE New Member

    Member Since:
    Nov 26, 2004
    Message Count:
    200
    Likes Received:
    0
    Trophy Points:
    0
    Agreed. For the intake, a Performer RPM or Weiand Stealth are perfect for that combo and reasonably priced.
    95GTAODE, Aug 20, 2006
    #3

  4. pb_paulie_b Founding Member

    Member Since:
    May 20, 2001
    Message Count:
    924
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Chaptico, Maryland
    The professional products copy of the Edelbrock performer RPM intake is a nice buy...PB
    pb_paulie_b, Aug 20, 2006
    #4

Share This Page