how to beat a ZO6

Discussion in 'SVT Forum' started by Stang_robert, Apr 1, 2005.

  1. Stang_robert New Member

    Member Since:
    Dec 17, 2004
    Message Count:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Alright guys i kno this would be extremely hard to do without doin an LS1 swap into the stang(over my dead body) but what would i need on my 97 cobra to beat a 2002 ZO6 spraying a 150 shot? :shrug:
    its stock except for flowmaster american thunder


    p.s i kno this will be darn near impossible
  2. chuckstang95 Member

    Member Since:
    Nov 2, 2004
    Message Count:
    138
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Boston
    a different car
  3. chuckstang95 Member

    Member Since:
    Nov 2, 2004
    Message Count:
    138
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Boston
    IM jk, but you would need some type of big power adder because right now you are probably around 265 at the wheels and he probably he has over 500 with the spray. So you will need major mods.
  4. Crusader New Member

    Member Since:
    Apr 1, 2005
    Message Count:
    2
    Likes Received:
    0
    Trophy Points:
    0
    Kenne Bell S/C,
    Bottom end build-up,
    just for starters...
  5. Stang_robert New Member

    Member Since:
    Dec 17, 2004
    Message Count:
    7
    Likes Received:
    0
    Trophy Points:
    0
    huge turbo?
  6. slyvette Founding Member

    Member Since:
    Nov 30, 2001
    Message Count:
    655
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Asheville, NC
    A one time race with a 400 shot is about all you can do trust me.

    -Sly
  7. chuckstang95 Member

    Member Since:
    Nov 2, 2004
    Message Count:
    138
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Boston
    troll? why would he mention swapping an ls1 into his cobra?
  8. sawman70 New Member

    Member Since:
    Nov 16, 2004
    Message Count:
    244
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Cleveland Ohio Area
    EXACTLY! Why not choose the 03/04 Cobra motor as his swap. I SMELL A RAT FINK!

    I do like the one time 400 shot idea though. :banana:
  9. Stang_robert New Member

    Member Since:
    Dec 17, 2004
    Message Count:
    7
    Likes Received:
    0
    Trophy Points:
    0

    i just read that post about the ls1 the guy dropped in a 96 mystic :puke:


    and what is the main difference between the 03 cobra and a 97 besides pistons and rods? :shrug: ....and excluding the supercharger
  10. sawman70 New Member

    Member Since:
    Nov 16, 2004
    Message Count:
    244
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Cleveland Ohio Area
    Iron Block, 85 Horsepower and the ability to get into the 600 Horse range for about $1,000.00 bucks. Not that you can't get that power, it'll just cost a heck of a lot more. What your asking is possible :nice: just costs some $$$ :bang: , I am disappointed if anyone in this forum would have referenced or executed the Chevy Motor swap though, that's just dumb and wrong. :notnice:
  11. Stang_robert New Member

    Member Since:
    Dec 17, 2004
    Message Count:
    7
    Likes Received:
    0
    Trophy Points:
    0

    agreed.... i was just playing when i made the reference :flag:

    and what do u mean by "the ability to get into the 600 Horse range for about $1,000.00 bucks"
  12. sawman70 New Member

    Member Since:
    Nov 16, 2004
    Message Count:
    244
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Cleveland Ohio Area
    03/04 Cobra + 2.8" Pulley + Good Tune = Aprox 550 Flywheel HP (Under a Grand)
    03/04 Cobra + 2.8" Pulley + Good Tune + CAI + Good Exhaust = 575 Flywheel HP ( A bit over a Grand)
    03/04 Cobra + Port Job on Blower + Injectors + Pulley + CAI + Good Exhaust + Possible Fuel Pump Work = over 600 Flywheel HP (Around $2500-$3,000)

    You can see these #'s on your car with a Ken Belle. You just have to buy the damn thing. You also have to look at your bottom end too. These two add up to several grand. That is where the 03/04 shine, they just came with a lot of stuff already there.

    Obviously these are approximate, you will see a variance of HP#'s on these cars on this web site. Bottom line, once you spend the coin on the car, the rest is simple and relatively inexpensive. Hell, I spent THOUSANDS on my 99 GT and did not get the power my Cobra has for less money total.
  13. cerp New Member

    Member Since:
    Mar 14, 2004
    Message Count:
    75
    Likes Received:
    0
    Trophy Points:
    0
    possible

    you need a nice turbo set-up or a kenne bell supercharger blowzilla with a bunch of boost, dont forget too forge and stroke.

    wait for that new cobra then slap a 100 shot on that just to make it fair.
    you can spend less money than he did for the vette and go faster.

    nuff said. :nice:

    ha ha, I too like the 400 shot one time use comment. :nice: :rlaugh: :lol: :lol: :lol:
  14. svtguy Founding Member

    Member Since:
    Feb 27, 2002
    Message Count:
    1,096
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Calgary, Alberta

    Agree to race at a 1/8 of a mile track.

    Buy a set of 4.56 gears & a set of slicks.

    Remove: jack, spare tire, rear seat, drivers seat, (use passager seat), sway bars, hood, trunk lid. etc.

    Warm up the tires good, lanch from 6000rpm & hope for the best.
  15. DavidCroft Founding Member

    Member Since:
    Mar 17, 2002
    Message Count:
    194
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Sugar Land TX(Houston Area)
    This is the most cheap and logical response to this thread. Didn't you ask this same question on SVTperformance, and then asked if you should change your weld in flows? Anyway Im with SVT guy. Maybe you could spray some too. But who in their right mind would race with a near stock 97 Snake against a ZO6 sprayin a 150 shot? I guess pray he blows his engine up. Which isn't too far off with the quality of chevy motors.
  16. QU!CK New Member

    Member Since:
    Apr 27, 2004
    Message Count:
    148
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Charlotte, NC

    Nah, he's not a troll, same question was posted over on svtperformance in the sn95 cobra section and he got the same results...

    ex:
    -pray that the z06 driver misses 1st then grabs 6th when going for 2nd

    -sc and 150 shot

    -03 engine swap

    -ARE YOU SERIOUS?! HAHAHAHAHAHAHA...*deep breath*....HAHAHAHAHAHA

    you get the idea. Good luck to you man, make sure you take it to the track when you race and hope that no GM guys are filming the masacre :p


    -J
  17. 1996COBRA Founding Member

    Member Since:
    Aug 30, 2000
    Message Count:
    363
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    dallas
    i was actually thinking this before clicking on the thread...

    1/8th mile
    4.56s
    150 wet n20
    slicks
    ***on helluva r/t***
    and hope he doesn come by you on the top end! :nice:
  18. KidTwist51 New Member

    Member Since:
    Jan 12, 2003
    Message Count:
    101
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Beverly Hills, MI
    Uhhh... make the guy in the Z06 start in 3rd? :shrug:

    Keep dreamin' pal, that is one wicked car even when it's not on the bottle. My cousin's partner has a blown Z06, dynoed at about 650 at the fly, I've driven a lot of super-fast cars and that is the flat out scariest thing I've ever driven. The original 2000 Z06 with 385hp was the first car that scared the crap outta me, the blown one was the car that made me see god.

    -Chris
  19. sawman70 New Member

    Member Since:
    Nov 16, 2004
    Message Count:
    244
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Cleveland Ohio Area
    That's all great but I am positive there are more Cobra's out there with that kinda power (and more) than there are Z06's. Not a lot of seriously modded Z06's floating around. I know of at least 3 700+ HP Cobras in the Cleveland area alone. Haven't lost to a Z06 yet but those damn Kenne Bell Cobra's.....Damn!!!!
  20. greenham64 New Member

    Member Since:
    May 6, 2004
    Message Count:
    32
    Likes Received:
    0
    Trophy Points:
    0
    Buy an '02 Z06, put a 200 shot on it ;)

Share This Page