I need some help guys...

Discussion in 'Fox 5.0 Mustang Tech' started by 66Stangs93, May 31, 2004.

  1. 66Stangs93 New Member

    Member Since:
    May 27, 2004
    Message Count:
    9
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Boston
    Ok guys, around the end of the summer i will have some money to spend on my 93 LX...not many mods so far. K/N cold air induction...mac off road h-pipe...flowmasters...normal first mods. Now its an AOD and i want to know what you guys think i can put in this thing to get it up to 400 horse at the rear wheels. I have been told cam and a bunch of other things, but just want to make sure my money is going in the right spot. ford motorsports e-303 cam is what i have been told along with trick flow heads and intake and some nice headers. Also, when i put gears in the rear end, bc i know that is a must, how hard are they to do? I want to stay away from NOS but i wouldnt shy away from a supercharger or turbo if it was the best budget-wise. any input will be greatly appreciated, thanks guys. :flag:
  2. ECU5.0 Banned

    Member Since:
    Jan 10, 2004
    Message Count:
    1,826
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    raleigh, nc
    first of all you need to get gears, stall converter, shift kit, trans cooler and subframes...so you have a good base to put those mods on. than id get those trick flow heads and get a custom cam. new intake or port your lower intake. get some upper and lower control arms to help you hook up


    Sponsored Ad

Share This Page