Life is not fair

Discussion in '2.3L (N/A & Turbo)' started by red_91_LX, Dec 14, 2004.

  1. red_91_LX New Member

    Member Since:
    Oct 16, 2004
    Message Count:
    10
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ontario, Canada
    :mad: Well I finally found insurance for my 91 2.3n/a ($305 CDN/month). I got a 10 day permit and was so happy to be back on the road when all of a sudden BANG! I was cruising down main street and my car started tapping so loud I couldn't hear myself curse. So I'm in the midst of pulling the engine...I phoned the junkyards and they want $500 CDN for a 2.3 with 144000kms I laughed and hung up the phone. I priced complete rebuild kit (bearings, rods, piston, crankshaft, rings, camshaft, and all the gaskets,) $625 CDN plus tax. I have an engine crane, engine stand, torque wrenches etc. Now here's the problem I'm 19 and I've read 10 different books on engine rebuilding I'm pretty sure I can do this but I wanted to know if anyone had any tips/pointers. I've almost got the engine out. The motor has 311000 on it so I know other things probably need changing.

    p.s. I'm getting a shop to hone the engine but should I bore it .01" over because of the high milage? or will replacing it with stock pistons be ok?

    Thank you for any help,

    One unluckly son-of-a-*****
  2. Dr_EluSivE Founding Member

    Member Since:
    Apr 24, 2002
    Message Count:
    2,387
    Likes Received:
    0
    Trophy Points:
    56
    Location:
    Central Illinois

    NOOOOO dont put another 2.3 N/A motor in, find a 2.3T motor, (turbocoupe, merkur xr4ti) computer and air meter, switch a few wires, and drive a 200+ hp stang instead of the 88hp beast you currently have. If you are going through all the trouble already why not improve it?

    Dr.
  3. mr_woodster Active Member

    Member Since:
    Jul 28, 2003
    Message Count:
    1,316
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    Riverside, CA
    If you go turbo, deffinatly join Turboford.org and post in the offtopic area. I know there are a few canadian guys that would help you out alot (and could be local if i remember right).
  4. red_91_LX New Member

    Member Since:
    Oct 16, 2004
    Message Count:
    10
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ontario, Canada
    Trust me when I say I'd love to do the turbo conversion but first I cant find any car within 100 km radius with a turbo motor and I have been searching for 2 years. Second it's christmas and my funds are running really low. 200+hp will have to wait.
  5. 4bangen Member

    Member Since:
    Nov 4, 2004
    Message Count:
    144
    Likes Received:
    0
    Trophy Points:
    16
    if you where in texas id sell you one alot cheeper.
    too bad about your situation. ive been waiting to do my 2.3t swap for several years and its now coming together.
    im even gona have the little toggle switch for hi and low octane :D
    ive got 3 n/a 2.3s in my gerage
  6. alienfreakboi New Member

    Member Since:
    Dec 3, 2004
    Message Count:
    18
    Likes Received:
    0
    Trophy Points:
    0
    at least ask these guys... they can probably find the turbo engine u need even if u cannot... perhaps the reason u cant find one for 2 years is these guys beat u to it... it never hurts to ask...

    cheers,
    eric.
  7. kiddiccarus New Member

    Member Since:
    Dec 24, 2003
    Message Count:
    1,298
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    RCA DOME/Aisle 328/Row 3/ Seats 4 and 5 or Bardsto
    They peobabally have an extra one too, the TF guys are pack rats. I have 2 Merkur Auto Transmissions in my garage alone.
  8. kiddiccarus New Member

    Member Since:
    Dec 24, 2003
    Message Count:
    1,298
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    RCA DOME/Aisle 328/Row 3/ Seats 4 and 5 or Bardsto
    They peobabally have an extra one too, the TF guys are pack rats. I have 2 Merkur Auto Transmissions in my garage alone.
  9. T3AL New Member

    Member Since:
    Oct 17, 2004
    Message Count:
    216
    Likes Received:
    0
    Trophy Points:
    0
    how do you do that kid?

    I thought it was impossable to double post on these kinda forums...
  10. red_91_LX New Member

    Member Since:
    Oct 16, 2004
    Message Count:
    10
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ontario, Canada
    Thanks for the help and suggestions guys I appreciate it a lot
  11. ZeroCulture Founding Member

    Member Since:
    Feb 10, 2002
    Message Count:
    449
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Thunder Bay
    Whereabouts in Ontario are you? If you're close i could help you out with some heavy lifting. I'm no guru, but can weild a wrench.

    PM me and let me know! I'm in Toronto, and also have a 91.
  12. kiddiccarus New Member

    Member Since:
    Dec 24, 2003
    Message Count:
    1,298
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    RCA DOME/Aisle 328/Row 3/ Seats 4 and 5 or Bardsto


    LOL, DIAL UP SUCKS!!! damn thing probably forgot it already sent the information to the server.
  13. Darkhorse845 Banned

    Member Since:
    Nov 17, 2004
    Message Count:
    236
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Las Vegas,Nevada
    LOL

Share This Page