Low Beam/ Fog Light Fuse #

Discussion in '2005 - 2009 Specific Tech' started by cLeAnRaCiNgLdR, Jul 9, 2007.

  1. cLeAnRaCiNgLdR New Member

    Member Since:
    Dec 7, 2004
    Message Count:
    98
    Likes Received:
    0
    Trophy Points:
    0
    I open my fuse box in the engine compartment and I see a bunch of numbers but have no idea what those fuse #'s work. My low beams and foglights are not working right now and I think I blew a fuse or 2. My High beams are working fine as of now.

    Any help would be appreciated:nice:
    cLeAnRaCiNgLdR, Jul 9, 2007
    #1

  2. bigcat start with the upper hole, and if more traction is

    Member Since:
    May 2, 2005
    Message Count:
    4,250
    Likes Received:
    2
    Trophy Points:
    78
    30 is a micro relay for the fogs. 58 is a 15A mini fuse for the fogs.

    i dont see the info in the owners manual for the low beams, only the high beams :(
    bigcat, Jul 9, 2007
    #2

  3. cLeAnRaCiNgLdR New Member

    Member Since:
    Dec 7, 2004
    Message Count:
    98
    Likes Received:
    0
    Trophy Points:
    0
    I bought my car used and no manual I have has any info on the fuses...Thanks for your help bigcat! I'll check those fuses and see what I can come up with.
    cLeAnRaCiNgLdR, Jul 9, 2007
    #3

  4. plnfixr320 New Member

    Member Since:
    Jul 10, 2007
    Message Count:
    55
    Likes Received:
    0
    Trophy Points:
    0
    The low beam on the 05 up Mustangs do not have a fuse. They are controlled by the "smart junction box" ( SJB ) which is one of the many computers used on the new Mustangs. If you were to unplug you head light switch, the head lights will actually turn on, they are powered to be off. As for the fog lights they use fuse #58 (15A) and relay #30. Good luck trouble shooting.
    plnfixr320, Jul 10, 2007
    #4

  5. cLeAnRaCiNgLdR New Member

    Member Since:
    Dec 7, 2004
    Message Count:
    98
    Likes Received:
    0
    Trophy Points:
    0
    Thanks for your help:nice:
    cLeAnRaCiNgLdR, Jul 10, 2007
    #5

Share This Page