N/A stock 2.3 performance

Discussion in '2.3L (N/A & Turbo)' started by guy050, Jul 5, 2004.

  1. guy050 New Member

    Member Since:
    Feb 14, 2003
    Message Count:
    11
    Likes Received:
    0
    Trophy Points:
    0
    does anyone know the stock 0-60 times and the quartermile times/speeds of a 91 or newer mustang 5 speed? any info would help, thanks
    guy050, Jul 5, 2004
    #1

  2. robbo1987*2.3* Founding Member

    Member Since:
    Apr 22, 2002
    Message Count:
    436
    Likes Received:
    0
    Trophy Points:
    0
    the answer is

    slow, slow, and slow um the n/a's are not quick at all but i do know that the 91 and up ( i think thats the years) whatever the dual plug heads came stock with i think 105 hp where the non dual plug heads only had 88 mine was slow as hell till i did the turbo swap
    robbo1987*2.3*, Jul 5, 2004
    #2

  3. Lex Founding Member

    Member Since:
    Mar 3, 2004
    Message Count:
    298
    Likes Received:
    0
    Trophy Points:
    0
    I think it was the conversion to Roller Cam for 91 and above that made a big difference.
    Lex, Jul 7, 2004
    #3

  4. Ray III New Member

    Member Since:
    Feb 10, 2004
    Message Count:
    604
    Likes Received:
    0
    Trophy Points:
    0
    88hp@4000rpm, 132 ft-lb@2600 up to 89

    105hp@4000rpm, 135 ft-lb@(I THINK 2600)rpm 91-93

    They had emissions heads on the newer ones, the roller cam was added to recover the horsepower loss and then some.
    Ray III, Jul 7, 2004
    #4

  5. Red_LX Doubt I could be of much help, unless you need por

    Member Since:
    Aug 21, 1998
    Message Count:
    10,471
    Likes Received:
    2
    Trophy Points:
    78
    Don't forget that the dual plug engines also had a half-point higher compressor (9.5:1). The extra 17 hp came from a couple different things.
    Red_LX, Jul 8, 2004
    #5

Share This Page