off road H-pipe on 2006 ??

Discussion in '2005 - 2009 Specific Tech' started by SonicGT, Aug 20, 2006.

  1. SonicGT Founding Member

    Member Since:
    Feb 4, 2002
    Message Count:
    188
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Ypsilanti, MI.
    I'm going to pick up my 2006 GT Monday and was planning on getting a Off-road H-Pipe for it and just using my MIL Eliminators that i have off my 2002 GT, but been reading that MIL's don't work on 2006, is this correct. if so what's a good tuner to buy that will turn the back o2's off.also any suggestions on a good off-road H-pipe.
  2. REDFIRE 05 GT New Member

    Member Since:
    Nov 18, 2004
    Message Count:
    284
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Junction City KS
  3. SonicGT Founding Member

    Member Since:
    Feb 4, 2002
    Message Count:
    188
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Ypsilanti, MI.
    i'm with you , they seem to work fine with the 05's, so i don't see why they would'nt work on the 06's, i'm hoping some of the guy's with 06's can tell me for sure if MIL's worked for them, since i already have them.
  4. bigcat start with the upper hole, and if more traction is

    Member Since:
    May 2, 2005
    Message Count:
    4,250
    Likes Received:
    2
    Trophy Points:
    78
    Location:
    7200 feet
    they claimed that the MIL eliminators wount work on S197s. well, they have been successfully installed on many S197s with minimal problems. a few have had to replace the MIL eliminators then it worked fine. my guess is a defective MIL eliminator to begin with. since you already have the parts, try it out and see if it works. if it does not, then buy an SCT XCAL 2 from brenspeed after you get your O/R H installed. brent is a good guy and will help you out. you can also call him and he has no problem answering your questions.

    www.brenspeed.com

    if you order the O/R H and the tuner at the same time, he ususally cuts you a little price break on shipping. i klnow he did this with the MIL eliminators, but he just had to toss those in the H pipe box.

Share This Page