Split-port Swap??

Discussion in 'V6 Talk' started by Elgrano, Mar 11, 2004.

  1. Elgrano New Member

    Member Since:
    Jun 20, 2003
    Message Count:
    30
    Likes Received:
    0
    Trophy Points:
    0
    I post a thread about changing my 97' V6 engine for a V6 00"+ and I got something about Split-port Swap... :shrug: Can you guys explain me a little bit about it...?
    If I find a nice/low milage engine 00'+ Do I also have to get a newer transmission?

    Thanks!!!
    Elgrano, Mar 11, 2004
    #1

  2. 98CobraClone New Member

    Member Since:
    Feb 28, 2003
    Message Count:
    636
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Ripley, Ohio
    You'd definitely need new muffler bearings and a flux capacitor.
    98CobraClone, Mar 12, 2004
    #2

  3. cuban3jumper New Member

    Member Since:
    Feb 9, 2004
    Message Count:
    80
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Northridge, CA
    A split port swap consists of a modified fuel rail, 99+ upper and lower intakes, 99+ heads, and a chip. Now you will also probably need 99+ exhaust manifolds but no you won't need a new tranny. Good luck oh and if you want the parts from one place contact www.velocitymustangperformance.com
    cuban3jumper, Mar 12, 2004
    #3

Share This Page