Hey guys, i just traded my 87 bucket ttop for an 89 gt in great condition with 69k miles and all maintenence records. only problem is the owner cut the wiring harness for the radio. could anyone tell me what each of those wires goes to. and what colors in the dash doors and back panels are positive and negative.
Stereo wires I busted out my factory electrical/vacuum troubleshooting manual for my 87 and this is what I got: Light green/Yellow= 12V hot at all times Yellow/Black= 12V hot in acc or run Orange/BLack= Day/Night Ilumination relay Light brown/Red= Instrument Illumination Light brown/White= LH Dash and Door speaker Orange/Light green= LH Dash and Door speaker Dark Green/Orange= RH Dash and Door speaker White/Light greem= RH Dash and Door speaker Pink/Light brown= LH rear speaker Pink/Light green= LH rear speaker Pink/Light brown= RH rear speaker Dark green/Orange= RH rear speaker Red= ground I realize that some of these are used more than once so if you can, get clip leads and an ohmmeter or test light and figure out which is which. As far as polarity, the book doesn't say.
thanks so much your my savior! really though thanks alot, thats what i needed. if anyone can chip in with polarity that would be great but if not i can figure that out!
