my alpine 9835 just arrived at my house. too bad im at work and cant go install it yet. ups tracking just said its delivered. now i gotta wait like 3 more hours. this sucks
well its here
- Thread starter ryanrule
- Start date
-
Sponsors (?)
szer0
New Member
when is anyone not incredibly bored at work? unless they have en exec position where they can just leave whenever
ryanrule said:
Well that all depends on your head unit. I hooked my Mach 460 subs into the sub out on my head unit because I don't have any other subs at this point. Then I set the low-pass crossover on the sub out to only deliver bass to the subs. If you have more than one RCA out, you could put your Mach subs on one and your real subs on the other and configure the crossovers separately. That would be ideal because then you can modify your sub volume and Mach volume separately. If you only have the sub out with a crossover on it, you could split it, but any adjustments to volume would affect both. Without knowing more about your head unit, its hard to make a recommendation. Hope that helped and didn't make things more confusing, haha.
Justin
well it has 3 set im sure, its the top of the line alpine unit.
heres the config system, it can be done on the computer and burned to a cd for transfer to the head unit.
http://i-personalize.alpine.com/nam/index.html
ill pm ya my id and pass if ya want
heres the config system, it can be done on the computer and burned to a cd for transfer to the head unit.
http://i-personalize.alpine.com/nam/index.html
ill pm ya my id and pass if ya want
heres some pics.
my only prob is the interior lights on the climate controls and switches dont work, think fuse is blown?
my only prob is the interior lights on the climate controls and switches dont work, think fuse is blown?
Jester73440
New Member
- Jul 14, 2004
- 46
- 0
- 0
did you hook up the dimmer wire to the new head unit? maybe the climate controls and the stock radio were on a common dimmer wire and that needs to be hooked up, or like you said could be the fuse good luck
nope, poped a fuse. i was in too much of a hurry and didnt disconnect the batt like im supposed to.
ok i keep blowing the interior lighting fuse. any ideas? its a little 5 amp one on the drivers side fuse box, number 35 i beleive. or maybe 37
hey ill be doing the same switch with my headunit when i get back to maine on the 3rd... whats the install involve just pulling off the bezzel and straight forward from there.. i just need to know how to get the old head unit out... from there im fine, i just dont wanna pull to hard on something im not suposed to 
theres two big screws on the bottom, thats it. the head unit is on a rail ton the bottom though, so u gotta pull it straight out for it to go easily
Similar threads
