Search results

17.2 over the last 20k miles. that's in a 2013 5.0..... F150. my 2013 5.0 6mt stang got 22.4 over 13k miles, but then had to go due to a bum knee :/

Those look good, downside in the price, 88 bucks each, more... i buy @ wholesale from tire rack, so the stockers are 112 each.

i have about 1/32 tread depth on my 2010. Whats the best tire going, dry traction, wet weather? I was gonna get the stock P-zero again, talk me out of it if there is something outhere better! stock 18" wheels... thanks!

You can buy anyhting your heart desires for a gt500, you do not need to own one.. I put a 2010 Gt500 front end on my gt a few months back after an unfortunate incident with a Deer... The gt500 rear bumper cover is the same as a gt... only the lower valance is different. AR3Z-17F828-AA is...

Those are auto numbers? what are the manuals doing? Impressive green one.

3.31 and 18" on mine. I think the OP is doing something wrong. There is no need to powerbrake to get the tires going....from idle, floor it, when the tires start spinning, back off a little, and give a little steering input to keep it fishtailing. if you lock it in 1st, it will bounce off...

Funny, my 2010, in drive, with just a normal fast push of the trac control button will roast em from an idle, no powerbraking, all the way through first, into second, and then chirp third. no chip, no long button press... I also do quick 180's in front of work to turn the car around on a...

Put it on AutoTrader, and CL. fixed amount of money on AT, free on CL. Worst thing that can happen, nothing. Best case, you sell it for 27k, and drive off in your new stang. Whaddya got to lose, other than like $30 bucks?

My 2010 handles great, for a mustang. I have driven numerous s2000's, while I do not like them, they handle much better than a stang.

What does that mean?

I ran a FD on a high milage 5.0 years ago. I had about 175k, and mad vibration between 1100-1600 rpm. I put the FD on at the same time as H/C/I. engine idles smooth as hell, even with the increased lope of the cam. that sold me. I have read dozens of negative posts about how they actually...

Camber plates will not alter the ride height on these cars, not 1mm. The spring rides on the LCA and the K memberm there is no way for struts to affect the height, it is your imagination. You want as much wheel travel as possible, without the strut contacting the hood. I cannot tell you...

15:1 2.5 turns lock to lock, fwiw. Never use offset rack bushings on a stock K-member. Never Steering Rack Bushing Tech : Maximum Motorsports, the Latemodel Mustang Performance Suspension Leader!

Hand calculated each tank. Most are 22 -23 mpg. It is driven 175 miles a day. Mostly very aggressive... GT auto the bronco (94- E40D) gets 12.5 same commute :eek:

AR3Z16612B That is the part number for the oem hood for the V6 and the GT. So, yes, the hood is the same between 6 banger and GT.

Wish I could afford to add a supercharger or something...My other hobbies (and other stangs) eat too much money. For now she stays stock. Fact is, a stock '10 gt, even with an auto is quicker than most anyhting I run into on the road. I dont street race, so I only need the power to pass...

I like the mid muffler, but in my experience (yes, actual experience) and a co worker with an 07, the mid muffler is not a bolt on kit, no matter what the manufacturer says. best to leave it to a muffler shop. my install was $150, that required alot of cutting, and fabbing of hangers to make it...

I bought mine from the spoiler store, unpainted since I put stripes up and over my whole car.

That area just does not lend itself to a pony... I kept it, cuz I am not trying to pass it off as a 500 or anything, it still says gt on the fenders and deck lid...although, I did buy a shelby deck lid spoiler, it just did not come in while I was painting it. I have painted it blue, but now I...

Well, a Deer decided to commit suicide while I was driving by @ 60 plus. Did about $7500 in damage to the front of my stang. I thought since I was spending so much on parts, why not put the Shelby parts on the front end? It cost about a grand more than the stock GT parts. Anyway, then I...