Search results

Wow....this is an old thread. He no longer has the transmission. I bought it 7 months ago and it now sits behind my 408w.

The tranny switch should have nothing to do with it, as the car was running prior to the swap. It is only germane as that is when I arced the starter. I put the old blaster coil on my other mustang. The car started. It is not the coil. This is a 4 cylinder to 408w conversion. The only...

The only thing to test, according to the msd troubleshooting guide, is the magnetic pickup, which I did test. ...if should have said tested the pickup in the distributor, not coil...it is fixed now.

BACKGROUND I just swapped in a 3550 for the c4 in the 89 in the signature. Prior to doing that I did not disconnect the battery. During the process of removing the starter I hit the contacts a few times throwing some sparks. I also tacked up my crossmember with a welder after adjusting. I...

.

moved

I am not sure in which state you are referring to as you don't show a location, but if that is for Washington you are mistaken. 15mph over the limit is not considered reckless or negligent merely because of the speed. If you are doing 15mph, using signals, etc. you are likely to get a speeding...

I am not aware of any prohibition in Washington of radaring people going in the other direction. Some agencies get lax in their yearly or bi-yearly calibrations. You can ask for the calibrations in court. However, that being said, I doubt that the state police are going to be lax on what...

I just picked up a used Hammer shifter for my c4. I know I need the conversion kit for the C4. However, in the c4 conversion kit instructions it talks about a cam plate that needs to be installed in order to use the neutral safety switch and back up lights. Looking at the c4 conversion kit on...

WTH are you talking about? Implied consent laws have to do with drinking and driving. With a DUI, vehicular homocide, or vehicular assault, and a person is unable to respond then blood is taken from that person. Implied consent has nothing to do with pursuing crimes. Back to the topic at...

Right you are and speed is not a necessary element. "(1) Any person who drives any vehicle in willful or wanton disregard for the safety of persons or property is guilty of reckless driving" Gotta pick your time and spot carefully before doing the stupid stuff that we all do from time to time.:D

Thanks for the photo.....I wasn't thinking of only using one mounting hole to the pump. I will have to go and twist it around a bit and take a second look. Thanks!

There is NO way to orient the bracket to line up with any of the holes. What you see in the photos is a 302 bracket from a car with factory air conditioning. The lower bolt hole that you see in the photo is the one that needs to line up with a hole in the head.

Thanks for the link. I need the small bracket, I did not know that they were different. Thanks again.

If anybody has put a PS pump on their 351w with the FMS bracket, does this look right? I have a 351w stroker that I am using the FMS specific PS bracket. When you place the triangular bracket behind the pump bracket (round bracket that the pump inserts into) it does not line up with any of...

I don't have a gauge hooked up. In fact I have all 3 outlets on the regulator plugged off. I was only testing the new feed and supply lines for leaks.

I have a 4 banger coupe that I intend on putting in a 351W based stroker. I recently put in a new fuel system. It is plumbed from a Grannatelli pickup, 8AN braided to fuel filter, Summit 140 GPH pump, 8AN braided to 1/2" aluminum line to bulkhead fitting, braided to Mallory regulator with...