Search results

Steering berring I need the piece of the firewall where the steering berring goes through. Converting a fox to SN and have to have the berring and enough to weld into the fox firewall.

Steering berring I need a piece of the firewall with the berring that goes to the steering shaft. Converting a fox and need the berring with enough metal to weld to the firewall in the fox.

I am in need of the piece of the firewall from one of these cars with the berring for the sterring shaft.I am installing in a fox so need enough to weld in. Please let me know if this is something you part with.

Steering berring I am in need of the bearing that gois in the firewall at the steering shaft with a piece of the firewall. Converting a Fox to SN and have to wel this berring in place. Let me know if this is something you would part with. Thanks

what would you charge for the dash, console and door pannels shipped to 28516. Thanks Dave

Thanks I will give that a try.

I have built a 302 P from a 97 exploer for a friend. It was running when pulled from the truck. After bumping in a F303 new head gaskets and a full cleaning there seem to be no compression. An air hold on the cylinders does not seem to be showing bent valves. It has stock rockers and push rods...

Junk You can remove all of it. The top valve is for the EGR valve and the bottom two control canister function. If you are still useing the fuel injection you may want to leave the charcol canaster at the front right of the engine bay just hook it to a vacume source on the intake.