Search results

Are the wires to the maf just bent over or are they not connected?

I'm looking to replace my lower control arms southsides.which maximum motorsports arms would you guys recommend,for a weekend driver? the heavy duty with the spherical bearing on the axel end or the J&M with the poly bushings on both ends.

Hey look in craigslist central jersey i thought i saw that car under parts sorry i don't have a link.t under mustang rims - $750 (North Brunswick)

Carteret n.j. here.

Ya i checked for binding and its not.the pedal works smoothly, its when i put it to the floor the butterfly is open like 3/4 of the way. yes i was looking for a stock cable. thanks for the reply.

Anybody know the correct size throttle cable for a 87 foxbody.mine seems stretched and is not allowing the throttle body plate to open all the way.i have a trickflow intake and 70 mm throttle body if that makes any difference. thanks in advance.

Thanks all i got it.

Ya thats what i thought i guess ill drain it an refill with atf. btw do they make dextron 2 or 3 anymore? i thought i read where its now dextron 5. anyway thanks for the reply

Okay all different opinions wc or nwc . can some one please clear up which fluid is correct. atf or gear lube. my car is a 87 and checking the fluid its clear so i assume its gear oil. should i drain it and put in atf? mfg says it doesnt matter wc or nwc use atf. very confused . thanks

Thanks i just got them today no problems but had to show two pics front and side view.

QQplates are jerseys version of historic plates. no inspection needed.

Just curios has anyone been denied qq plates in nj because of the hood on the car?

im interested how much to ship to 07008

My bad. i guess i should not drink while working on my car it is a one inch socket to remove and install the ect sensor.

Thanks ya i know the next size was just wondering if anybody knew for sure.i guess its time to get some more big wrenches.

What size wrench do i need to remove the ect sensor? 87 mustang.the replacement sensor i bought is one inch. the one on the car is smaller.since i dont have a lot of large wrenches it would help to know so i can buy the right size. thanks for any help:shrug:

I have a 200 on 185 off fan switch from summit. it is mounted in the thermostat housing the problem is its not turning my contour fans on until the temp is at 210-215. thats with a autometer electric gauge. it is the second switch i have tried,would mounting it in a different location make it...

i realize this is an old post but could someone clear up the the wire colors for the fan connections?

im pretty sure it is 2 speed. did you connect the fan motor wires together or is one of them a ground?

Any one know which wire on the contour fans is the high speed? also do you have to use the resistor on the lower left corner to run the fans in low speed? i am pretty confused on how to properly wire the fans i will be using a relay setup not a controller.the relay setup has 2 80 amp relays and...