Search results

It is still a work in progress but I got the mounting all in and the wiring done I just need to connect it up and slip it in along with the modified glove box. I created a plywood board to go under the case and screwed to the existing two holes that were for the glove box. I was going to...

I just went through this thought process. I didn't want to cut the dash so I am putting it in the glove box and running the aux input down to the console for my ipod. That way when the glove box is closed I still have the original look. With remotes you don't need to have it out in the open...

I had the same issue not that long ago a quick way to check is put the brakes on and fiddle with the turn signal arm if they both come on that is your problem. The arm on mine was actually going down too far due to weight over the years and canceling it out and thus I only had one brake light...

Hello everyone, I just moved to Calgary from the east coast. Currently the stang is in storage but now is the season to work on it. :D I am wondering if there are any local parts places that you folks would recommend. On the east coast the selection was very limited to say the least and I...

So it sounds like if I wanted to strip the car and get it repainted then I can leave the lead just where it is.

Hey, I have been looking into getting a classic mustang to restore. I was looking at a 66 and the restoration was done back in the 80's. No rust which is rare in my neck of the woods but the owner said the body work was done with lead/ body solder instead of bondo. Is this a good thing or a...

I am just playing the waiting game. I am thinking mid April if the weather works out. We just got a dusting of crap... I mean snow this morning and I want to make sure the roads are cleaned off.

I had the same problem over a year ago. I have a 90 vert and of course Ford could get the clocksping but not the plate for it. So I tried a junkyard (don't go this route) most clockspings are blown due to the airbag going off. If you do find one that has not gone off then the wires can not be...

The lack of cracks was my main reason for the question. To be honest I figured I would see cracks when I opened it up but it just looks like the two metal pieces separated slightly. In that case I might rivet them back together. Thanks

The front

Hello folks just looking for some quick help. I got my front seat apart to try to fix the gangster lean I had going. I wanted to confirm where I should be fixing the seat. See the attached pix it looks like these are the two places where the seat is broken. Should I get the seat welded, or...

Dam I guess that means the cable is stretched or the ratchet adjustment is not working.

Why not KYB I was orginally thinking of them considering thier price?

Ok I am confused after reading the Clintons manual and reading some posts I am not sure if there is any way to adjust my parking brake cable or not. Let me start by saying the rear brakes are adjusted properly I just checked last night to make sure. The parking brake does engage but at the...

I just finished up the install of some reverse glow gauges over the weekend and as always when one project finishes my thoughts turn to the next project. I am convinced modding is like a drug. I was wondering about suspension setups. From doing a visual inspection the shocks and struts on...

I do have a decent size garage, single but right now I have my 90 stang in there with our outdoor swing and BBQ and all my tools plus I have a full unfinished basement so that should be ok. I agree with the money lets a assume I get a 66 with minimal but typical rust (floor, doors quarters)...

That is good to know about the parts. In Canada it is a pain in the ass sometimes to get parts as it is. I don't mind putting the work into it but in terms of cost I think it would be cheaper to start with a v8 then have to convert everything over based on the fact that you would have change...

I agree, my stang that I have now is from Florida that I brought up. It would be from down south I am just not sure where to look. Up here the cars are crapola . Should I look for a I6 cheap and convert it over to a v8 or look for a v8 vert. Should I stick with a vert or go coupe or...

Starting Project Advice Hey everyone I am just looking for some honest opinions on starting a new project. I currently have a 1990 stang convertible that I have done some work to, engine, interior, top, brakes, suspension, tires the usual. I am somewhat happy with it now and I am looking...

Anyone ?