Search results

Hey, What do I need to do to get an Aluminum Aerostar drive shaft on my car? Can it be done? What length should it be? Thanks

Im not going to change the cam. Can I get rid of the ticking by adjusting the pushrods then? If I go to 1.6s will the ticking stop? My friend has the exact same 1.7s with a stock cam, and he has zero ticking, so I dont think its the peds themsevles.

Well my Ped Roller Rockers are ticking and can't shim them anymore. So can I adjust with pushrods then?

Hey, I noticed while looking at my rear driver side brake, this peice of metal shown in the first pic below, is kinda hanging, between the caliper and brake pad. Should it be like that? The second pic is my passenger side brake, and it doesnt even have the peice of metal attached? Do...

Yes the crane kit.

Anyone?

Hey, With the combo in my sig which is better, 1.6 or 1.7 roller rockers with E-Cam (E-303) and my combo? Will I lose topend, but gain lowend? Will I lose alot of power? Or will it be better or same? Im thinking of changing them because I might do a stud mount conversion roller...

Hey, With the combo in my sig which is better, 1.6 or 1.7 roller rockers with E-Cam (E-303) and my combo? Will I lose topend, but gain lowend? Will I lose alot of power? Or will it be better or same? Im thinking of changing them because I might do a stud mount conversion roller...

Hey, I heard you can put Automatic Transmission Fluid, like a quart mixed with your oil, and run it for a 1000-3000 miles to unstick noisy lifters. Has anyone else done this? Right now Im running Mobil 1, 10W30 and have a couple noisy lifters, even though they all just got replaced...

Hey, I heard you can put Automatic Transmission Fluid, like a quart mixed with your oil, and run it for a 1000-3000 miles to unstick noisy lifters. Has anyone else done this? Right now Im running Mobil 1, 10W30 and have a couple noisy lifters, even though they all just got replaced...

Hey, Are 87-93 LongTube headers the same design as 94-95 ones? I know the 94-95 have the egr bung, but besides that are they actually different? I don't have smog stuff anyway. Or are the 94-95 ones a better fit?

Hey, I have a 1994 Mustang GT. It has no A/C in the car right now, wasnt added as an option. So what are all the parts I need to be able to run A/C in my car? And will I have any problems with my intake and the A/C lines,etc...? Thanks

This is very general answer but its seems to be like this... N/A = 3.73s Supercharger or Nitrous = 3.55s Turbo(s) = 3.27s Now this it just what "most" people are doing, it doenst mean its the best for you or everyone but seems to be what most people do. Also check out this...

Thanks for the info. Right now I have pedestal mount Cobra/Crane 1.7 roller rockers. http://store.summitracing.com/partdetail.asp?part=CRN%2D44746%2D16&autoview=sku Can I still use them or do I need to get stud mount rockers to work with that kit?

Thanks for the info. Right now I have pedestal mount Cobra/Crane 1.7 roller rockers. http://store.summitracing.com/partdetail.asp?part=CRN%2D44746%2D16&autoview=sku Can I still use them or do I need to get stud mount rockers to work with that kit?

Well my plan is to supercharge the car with a S-Trim, with around 8 psi.

Well my plan is to supercharge the car with a S-Trim, with around 8 psi.

Hey, Im looking at the Crane Rocker Arm Conversion Kit. http://store.summitracing.com/partdetail.asp?part=CRN%2D36655%2D16&autoview=sku Im thinking of switching to these for more adjustment in my valve train. As im getting ticking from my ped rocker arms. Are these good, will they...

Hey, Im looking at the Crane Rocker Arm Conversion Kit. http://store.summitracing.com/partdetail.asp?part=CRN%2D36655%2D16&autoview=sku Im thinking of switching to these for more adjustment in my valve train. As im getting ticking from my ped rocker arms. Are these good, will they...

Hey, I have some ticking noise comming from my engine. Refer to this thread for more info and a video clip with sound... http://forums.stangnet.com/showthread.php?t=722173 Im thinking it might be one or more of my Cobra 1.7 Pedestal Mount Roller Rockers, how do I re-adjust them/set...