Search results

347 11:1 comp, custom cam, canfield 192cc heads, victor jr intake, 750 demon carb how much power should it make?

i put 4cyl springs in the front of my coupe. they helped me out!!!

carb!

60' are normally low 1.6's. I had a 1.55 60' on the pass where it got loose at the 1/8. i aborted the pass. might have been a 10 sec pass. should be a 9 sec car on the hose!!!!! OH YA IT STILL HAS THE STOCK REAR CONTROL ARMS AND BUSHINGS ALL WORN OUT. CANT WAIT TO PUT THE NEW ONES ON.

just a weak 351

couple more.

few launch pics. hookin pretty good. gettin loose at the 1/8.

i have the trickflow track heat kit on a 11:1 306 set up for nitrous and when i hit the 75 shot zex on mine its like i got a kick in the ass. it hits harder than 150 on the old motor. i run my bottle pressure at 1100psi. I LIKE TO FEEL THE HIT!

i run 4.10's and dont run out of gear on he motor. unless im juciein her! then you just put a taller tire on. and go!

heres mine what ya think?

thats how mine works.

do 4.10's you wont regret it!!!!

i have an aod notch with 4.10's 28 inch et streets trickflow h/c/i and run 12.93 untuned since build. then put a 75 shot on it and hit it about 30' out and the aod short shifts 3rd and ran a 11.95@115

i run a 75 shot in my zex kit with trickflow h/c/i and an aod. i run 1 range colder plugs and timing is ok with that small of a shot. i went to the track fri hit the bottle about 30 foot out and ran a [email protected]

i run 12.90's at 106 with 4.10's and a aod with 26 inch tires and im at 6000ish

i did it to mine made a big difference as long as you put poly bushings in them you be ok

ttt

im putting the stuff in my sig no the car this winter and was thinking of just buying a shortblock. i didnt know wether a 331 or 347 would be better for the parts i have gotten already. i was also thinking i might want to ditch the stg1 cam and go for the stg2. what you think? what are some...

By Pass the fuel pump? Doesnt the computer cut back fuel by the injector pulse?

like the title says is there a cheap way to get by it. i need to turn more rpm and dont want to buy a chip just for that.