91 lx supercharger bypass

[criptonx09]

new here and to cars also
bought a 1991 5.0 lx about a week ago has a bunch of work done to it but need a new superchager, i plan on gettin a new one as soon as my money stacks back up but for now how can i bypass this i was told i have to reconnect my mass air and everything but below is what im lookin at and i dont know exauly what to connect to what
the supercharger was a vortech v2 sq if that has anything to do with it

http://i732.photobucket.com/albums/ww321/criptonx09/downsized_0316091431.jpg

i also was told to block off the oil supply and return lines but dont know if i have the right hoses can someone please give me a in detail the where abouts and how to block them off, also is there anything else i need to do?
Thanks for any help real newb here

 

[strtrcr50]

Your setup appears to be intercooled. Is it?
http://www.vortechsuperchargers.com/download.php?dir=pdf/manuals&file=4FA218im.pdf
That is the installation manual for a fox body mustang. From that, you will be able to see where the oil feed line is tapped. If it's tapped in according to the directions, you'd just remove the t and reinstall the oil pressure sender like stock. I guess for the return, you could stick a bolt in the supercharger end of the hose and clamp it down. Then just make sure you have secured the hose so it stays up high. As far as getting the mass air hooked back up, it should be on the lower of the 2 pipes going into the fender. You need to figure out a way to plumb that to the throttle body. Or I guess you could get a U shaped hose/pipe and hook the 2 together and it should work.

 

[criptonx09]

thanks alot man

 

[strtrcr50]

NP. I'd also give vortech a call about upgrading your current blower to a si trim. They will rebuild it, and change the housing and impeller. Si trim is inbetween a t trim and and s trim. More boost lower and much more on top if you pulley it up.

 

[criptonx09]

i dont have the actualy blower it was sent to a place to get fixed and never returned how much do you think i could get a use one for under 1000?

 

[strtrcr50]

i dont have the actualy blower it was sent to a place to get fixed and never returned how much do you think i could get a use one for under 1000?

Start shopping. I got my strim(full kit) and a gt40 tubular for 1k. I'd say if you look around, you'll find one.

 

[strtrcr50]

Vortech V-1 S-Trim Head Unit - Corral Forums

 

[criptonx09]

i havnt been able to find just a blower for sale yet but ill keep lookin and the
link = deadend for me?