hey guys, i'm in the process of planning a 347 build. to begin the car is a 93 conv't gt. going to be a street/strip car. more of a weekend warrior. a few years ago i did a 351W build and didn't plan very well. ending up costing me more then i intended. so this one i want to run smooth. here is a list of the major parts:
DSS Level 10 302 Block
Rotating Assemble (CNC Motorsports #1-94170-1) New Scat 9000 Series Crankshaft, Scat 4340 Forged I-Beam Rods with ARP 3/8" Cap Screw Bolts, SRP Flat top pistons - 1/16 1/16 3/16 Rings lands, Plasma Moly Piston Rings, Clevite 77 Rod and Main Bearings
Melling High Volumn Oil Pump #M68HV
Moroso 7qt Oil Pan w/ Pick-Up
Compition Cams FW XE282HR-12 (.565 int-232 dur., .574 exh-240 dur)
Ford Racing Performance Timing Chain
Ford Racing Performance Roller Lifters
Competion Cams Push Rods #7826-16
Edelbrock Victor Jr. Aluminum Cylinder Heads
Competition Cams Roller Rockers #1431-16
TrickFlow Steet Heat Intake
Ford Racing Performance 30lb injectors
C & L 80mm Mass Meter
BBK 70mm Throttle Body #1523
This not a complete list, just the basics. 3 items that are still up in the air. the heads, the cam, and the intake. i have done a few searches on here about heads to run on a 347. the search resulted in 2 different heads. AFR185 and the Victors. specing the right cam will probably be the tuff decision. i am sure i could get a custom one, but i am also looking at cost. as for intake, could not find many threads on here about that. i made a guess to go with the trick flow. i have been trying to find writes on this intake. not much luck so far. any input will be appreciated.
thanks
DSS Level 10 302 Block
Rotating Assemble (CNC Motorsports #1-94170-1) New Scat 9000 Series Crankshaft, Scat 4340 Forged I-Beam Rods with ARP 3/8" Cap Screw Bolts, SRP Flat top pistons - 1/16 1/16 3/16 Rings lands, Plasma Moly Piston Rings, Clevite 77 Rod and Main Bearings
Melling High Volumn Oil Pump #M68HV
Moroso 7qt Oil Pan w/ Pick-Up
Compition Cams FW XE282HR-12 (.565 int-232 dur., .574 exh-240 dur)
Ford Racing Performance Timing Chain
Ford Racing Performance Roller Lifters
Competion Cams Push Rods #7826-16
Edelbrock Victor Jr. Aluminum Cylinder Heads
Competition Cams Roller Rockers #1431-16
TrickFlow Steet Heat Intake
Ford Racing Performance 30lb injectors
C & L 80mm Mass Meter
BBK 70mm Throttle Body #1523
This not a complete list, just the basics. 3 items that are still up in the air. the heads, the cam, and the intake. i have done a few searches on here about heads to run on a 347. the search resulted in 2 different heads. AFR185 and the Victors. specing the right cam will probably be the tuff decision. i am sure i could get a custom one, but i am also looking at cost. as for intake, could not find many threads on here about that. i made a guess to go with the trick flow. i have been trying to find writes on this intake. not much luck so far. any input will be appreciated.
thanks