Priming

[chrlsful]

mustang I V R in #17 & 20

 

[General karthief]

The 'anti slosh' module wouldn't make the gauge peg, that is usually a grounded wire someplace or the wrong sender.

 

[Mello]

Thanks all for the great advice. Got me a slosh module and will try to install it tomorrow. These modules are kinda hard to come by.

 

[Mello]

I have a 1987 Gt Mustang 5.0. With 4 lug wheels.

Is there a car , with 5 lug rear , disc preferably, that I can go hunting for to swap mines.

 

[86fox]

I have a 1986 Foxbody that will not prime. I’ve replaced the fuel pump, fuel filter, starter, relay, reset the inertia switch, battery and still not priming. A couple months back it started up perfect every time, then it would only prime sometimes then it would only prime with jumper cables now it won’t prime at all. Car means a lot to me so any help would be appreciated

 

[General karthief]

I have a 1986 Foxbody that will not prime. I’ve replaced the fuel pump, fuel filter, starter, relay, reset the inertia switch, battery and still not priming. A couple months back it started up perfect every time, then it would only prime sometimes then it would only prime with jumper cables now it won’t prime at all. Car means a lot to me so any help would be appreciated

Start a thread for your issue listing info on the car like modifications, if the stang was running and driving before this issue or if you bought it that way or any work done before this issue.