If you're thinking about going black, don't think - do it.
- Thread starter Boss 351
- Start date
I can definitely see black over blue leather...but i like my white
i would like to change the dash from a "two tone" gray to one solid color though.
i would like to change the dash from a "two tone" gray to one solid color though.
I like the solid black, even though I hated it years ago.
The 99+ leather seats could probably be had for $200-400 without much worry.
I will be getting rid of these soon and going with something that I can say with 100% confidence, you will NEVER SEE IN A MUSTANG! Stay tuned for something really off the wall with the new seats.
The 99+ leather seats could probably be had for $200-400 without much worry.
I will be getting rid of these soon and going with something that I can say with 100% confidence, you will NEVER SEE IN A MUSTANG! Stay tuned for something really off the wall with the new seats.
I did mine in black and turned out great. FYI, you CAN dye the carpet as well. I was in a pinch and just went ahead and dyed my carpet. Looks fine if you leave in nice floormats. Just spray the paint in different directions to get plenty of coverage.
![-[White90GT]-](https://cdn.stangnet.com/data/avatars/s/113/113468.jpg?1322929630){kind=avatar}
I'm in the middle of doing this right now...and i mean right now. My car is sitting outside with 3/4 of the interior out of it.
Question: Anyone with a hatchback that has done this....how did you get the back quarter panels off??
I'm stuck. The seatbelt goes into that panel, and the only way i can get that panel off is to unblot the seatbelt. I have tried, but that bolt is so damn tight it wont budge. The only thing I can think of is an air compressor, impact wrench, and the biggest "star" bit i can find? But i have none of that.
Can anyone help me?
Question: Anyone with a hatchback that has done this....how did you get the back quarter panels off??
I'm stuck. The seatbelt goes into that panel, and the only way i can get that panel off is to unblot the seatbelt. I have tried, but that bolt is so damn tight it wont budge. The only thing I can think of is an air compressor, impact wrench, and the biggest "star" bit i can find? But i have none of that.
Can anyone help me?
You have to get that seat belt off... No need for air, but you will have to work at it and probably go through a lot of those bits.
i was thinking about it..maybe ill do that this weekend..how many cans do you think it would take? 2 or 3 for good coverage?
I'm in the middle of doing this right now...and i mean right now. My car is sitting outside with 3/4 of the interior out of it.
Question: Anyone with a hatchback that has done this....how did you get the back quarter panels off??
I'm stuck. The seatbelt goes into that panel, and the only way i can get that panel off is to unblot the seatbelt. I have tried, but that bolt is so damn tight it wont budge. The only thing I can think of is an air compressor, impact wrench, and the biggest "star" bit i can find? But i have none of that.
Can anyone help me?
put a breaker bar over the wrech. thats what i had to do...
LOL! I enjoy mine too, even in our hot, humid Houston weather...... without AC!!! It broke a few months after I did the install, and I haven't had a chance to replace it all.
I liked my red interior, afterall I bought it new that way. But when I found a black interior for cheap, I decided to go for it. Takes some work to keep it looking clean, but it sure does look better than the old interior!
Finally got the bolt off. Went to advance and got a star bit set...it came with a ratchet. Also went ahead and bought some Tuff Stuff and my paint. I was going to use the electric drill and see if I could put the bit in there and pop it loose, but after about 10 seconds of it binding down and starting to smell I stopped. Got the ratchet in there and gave it a few good tugs and it finally loosened up. The only thing I didnt like was cutting a slit where the bar for the back seats goes through it.
Doing some painting here soon, try to get some pics up tonight or tomorrow.
Doing some painting here soon, try to get some pics up tonight or tomorrow.
im currently in the process aswell just that it has been raining these last couple of days so i have to wait until it stops or something
Le fin...
I finished the plastic parts yesterday, just need a new headliner and sun visors. I need to take pics. Oh and I wonder if 95 seatbelts will fit? I dyed my stock seatbelts for now but it never retracted (since I bought the car) and the belt itself is pretty worn on the edges.
Now the search for black leather 01+ seats starts...
I finished the plastic parts yesterday, just need a new headliner and sun visors. I need to take pics. Oh and I wonder if 95 seatbelts will fit? I dyed my stock seatbelts for now but it never retracted (since I bought the car) and the belt itself is pretty worn on the edges.
Now the search for black leather 01+ seats starts...
Some guys have installed the later model seatbelts on their Fox cars. They had to bend the mounting bracket locating tab and move the retractor around on the bolt to find the right position to allow the belt to release and retract properly. Maybe do a search for sn95 seatbelts or something.
I plan to at some point find some belts from a 01-04 and try them in my car. The newer seats have the nice attached belt latch, but they require the newer belt to work.
I plan to at some point find some belts from a 01-04 and try them in my car. The newer seats have the nice attached belt latch, but they require the newer belt to work.
carpet is a dark grey carpet that was given to me, not a molded piece... buying a black molded carpet later on when I find the seats I want. The shifter is the stock piece but cut and machined... 
The mustang text on my radio delete plate lights up with the parking lights - that's my rice. Oh and I'm getting an aftermarket steering wheel next week...
The mustang text on my radio delete plate lights up with the parking lights - that's my rice. Oh and I'm getting an aftermarket steering wheel next week...
I love mine. It's all OEM parts too....no dyeing
I just need to find some nice dark charcoal 99-04GT seats
I just need to find some nice dark charcoal 99-04GT seats
you have no idea how lucky you are...
