Blinkers Again...They are not working

[Majin88]

I was waiting at a light to turn to left and when I went around the corner my whole instrument panel went whacky, sowhen I was down the road a little way I pushed in the clutch shut it off and restarted it back up the guages went back to normal but no turn signal, thinking it might be a fuse but didnt see one or maybe a ground wire I dunno help me out guys

Thanks

 

[papaford]

could also be the ignition switch take the cover off the steering colum and see if theres any melting at the plug

 

[QWIKSVO]

sounds like you have a wire grounding out or your blinker fluid is low

 

[Dr_EluSivE]

check your hazard light switch. In many cars the signal lights are wired through the hazard switch and if that switch gets dirty or goes bad then it takes out the signals and hazards. Depending on the car i have even seen a bad hazard switch take out brake lights!

Dr.

 

[mr_woodster]

or your blinker fluid is low

better go check mine!

 

[Majin88]

I accually got them fixed, went to an autopart store and found an open manual and looked at wiring diagrams and lighting. Found out mine had 2 different flashers on it, I was clueless cause my hazards still worked but no blinkers. I checked the blinker flasher and it didnt work so I bought a new flasher, Now they work. It takes a few seconds for them to come on though.