Spintech Side Exhaust - Installed

[281pony]

ill let you know how it turns out. my subframes are probably 1.5" thick. the question for me now is, how much do i need to take off?

ironheart, this should bolt right on fine, but do you want side exhaust or just a normal catback?

 

[Michael Yount]

Ironheart - long tubes make MORE low end torque, not less. MM&FF's header test last month had the long tube BBK's making almost 40 lb-ft more torque at 3000 rpm than the shorties. That increase disappeared as the revs went up - tests run on a 347.

Spin tech makes oval pipe and fittings. If you're not already using them, and you're looking for more ground clearance, you could run their 2.5" round to oval adapater on the outlet of the muffler, and then run oval pipe/ell to get to the side in front of the rear tire. Probably pick up at least an inch of clearance that way.

 

[SuperStang83]

I have seen a Fox with the side skirt with the exhaust and it looked sweet!

 

[88GTStreetRod]

I will try to post some more pics, As the exhaust is breaking in, the sound is getting deeper. I have had no issue with ground clearance. I have long tubes and they hang down as much as the spintechs. I get tons of looks when i pull up because people hear me comming down the road.

I have seen a Fox with the side skirt with the exhaust and it looked sweet!

 

[88GTStreetRod]

I have vid and sound clip I can email you if you would like

I will try to post some more pics, As the exhaust is breaking in, the sound is getting deeper. I have had no issue with ground clearance. I have long tubes and they hang down as much as the spintechs. I get tons of looks when i pull up because people hear me comming down the road.

 

[cardudeusa]

I love the way that looks, cant wait to hear these babies!

 

[281pony]

email me the vid please, [email protected]

 

[88GTStreetRod]

Your hotmail account is over the storage limit. I will try later

 

[88GTStreetRod]

5Literfeaver, I just e-mailed you a clip, let me know what you think!

 

[92GreenGT]

[email protected]

I will even host it for ya.

Dave

 

[281pony]

my hotmail account is at 2% storage, its just too small.

ill wait for 92greengt to host it i guess

 

[92GreenGT]

I will if he will send it.

I got 100mb storage on Yahoo.

Dave

 

[69Rcode_Mach1]

Email me the vid too please. I have a 2.5" Dr. Gas X-pipe system and am trying to choose between dynomax bullets and spintechs.
E-mail me at [email protected]
Thanks

 

[88GTStreetRod]

Sent clip to 92GreenGT and 69Rcode Mach1

 

[92GreenGT]

Alright, Yahoos email server doesnt seem to be working, I have tried 500 times and its not letting me in. So I will keep on trying until I get it, then I will host it for ya.

Dave

 

[Horsepower67]

Liking those Halibrands on yuor car, very nice aggressive look, with a touch of old school. I might have gone one inch bigger on the rim size though, but that's just me. Your set-up looks great as is.

 

[69Rcode_Mach1]

Shoot I guess the attached file was too big. I can't receive. AHHHH SOMEBODY HOST THIS IM DYING TO SEE IT!!!!!

 

[92GreenGT]

Me too, I would be able to get it but they are updating the Yahoo mail stuff so I cant get into my email.:damnit:

Dave

 

[92GreenGT]

Finally got into my email. Bad news, the file isnt there. Did it go through? Do you have AIM or ICQ or something? I will get it through there.

Dave

 

[88GTStreetRod]

I wish I knew how to post it some place so that you can hear it. After all of crap of trying to send it to you, I hope you guys like it. I was actually thinking about selling it, my wife does not like the pipes near the window. I run 114 octain with no cats and she does not like the smell or the noise. I think it sounds sick, she is just too sensitive