hey guys.. long time from the boards.. its good to be back.. anyway.. this might sound dumb but how do you take the center console out from around the sterio and crap..my woman got me a cd player and its one of those.. it might be crap but i got it for oyu so put it in.. so yea.. if anyone could help me out that would be awesome.. thanks
Center Dash Removal
- Thread starter DRFT_STNG
- Start date
-
Sponsors (?)
donjohn
New Member
there's a screw behind the existing radio that's on there... you need about a foot extension and a torx bit i think. the radio should slide out w/ those stereo clip things (my car didn't have a radio when i bought it so i'm not sure about the clips) that's the only screw holding the bezel in place
legalize420
Active Member
i did not have to take the whole thing off. there are two screws under the radio. i took those out and was able to slide the old radio out.
legalize420
Active Member
DRFT_STNG said:
now that i think about, are there little squares in all the corners of the radio. mine was actually not the stock. if you cant pull it out, check the screw on the back of the console like mentioned earlier.
No, the squares are for a certain tool. You need a din puller however I did it with 4 small allen keys. You need to stick somehting in each one of those 4 holes untill you hear a click and its secure, then it slides right out. Its like you have to push 2 clips one on either side towards the radio. Try using a clothes hanger, however they do sell the tools.
They look like this
http://cgi.ebay.com/ebaymotors/ws/e...tem=7986026350&category=38655&sspagename=WDVW
They look like this
http://cgi.ebay.com/ebaymotors/ws/e...tem=7986026350&category=38655&sspagename=WDVW
Similar threads
