http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-4234K%20%20%20%20%20%201&comp=LRS
Will 17" Bullitts fit on my car with this kit?
Will 17" Bullitts fit on my car with this kit?
http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=WSP-PA1%20%20%20%20%20%20%20%201&comp=LRS
so if i used these bad boys it would work?
A friend of mine ran ford bullit wheels with that style conversion, but he could not run the bullit center caps.
To keep this tech the reason they wont fit is a clearance issue? does it invlove backspacing? I am gonna get aftermarket ones not Ford OEM.
7upstang posted this info in another thread. They sell complete brake setups.
http://www.mpsautosalvage.com/products/list.cfm?TypeID=39
OK here's the deal. I ran those for 3 years w/o any problems. 3/8" spacers on the front, the wheel did not stick out, shoulder style lug nuts that reach into the wheel for more stud thread retention, modified the dust and center caps. You could not tell any difference. Worked fine.
Im assuming your talking about my original post...thanks for the feedback
If I were to run a SN95 Brake Setup is there anyway I could run a 17x10.5 inch rim out back?