Shelby Frnt Valence on GT
- Thread starter GTstang8905
- Start date
-
Sponsors (?)
I searched through looking for a price on just the shelby front valence. Im sure I looked over it. Can somebody let me know how much and where I could purchase one.
Here's your link guys...says it coming March 2007...look under Shelby GT or GT-H
http://www.shelbyautos.com/mustangparts2.asp
Ok here is your info then... Ford OEM Shelby parts
*Front bumper cover--$248.75 #7R3Z-17D957-APTM
*Lower valance--$61.60 #7R3Z -17626-AB
*Upper grille--$209.08 #7R3Z-8200-A
*Lower grille--$154.77 #7R3Z-17k945-AA
*Fogs--$116.07(ea) #7R3Z-15200-A
Thats pretty much everything you'll need to duplicate the Shelby front end, along with a couple mounting brackets here and there. The headlights must be changed also-those are avaliable aftermarket I believe. Ford does not offer it in any kit- all individual pecies.
*orange07- the shelby splitter will eventually go on the stock GT bumper cover-ONLY with some fabrication and cuttin. You should ask theboss about that- he put it on his GT.
*Front bumper cover--$248.75 #7R3Z-17D957-APTM
*Lower valance--$61.60 #7R3Z -17626-AB
*Upper grille--$209.08 #7R3Z-8200-A
*Lower grille--$154.77 #7R3Z-17k945-AA
*Fogs--$116.07(ea) #7R3Z-15200-A
Thats pretty much everything you'll need to duplicate the Shelby front end, along with a couple mounting brackets here and there. The headlights must be changed also-those are avaliable aftermarket I believe. Ford does not offer it in any kit- all individual pecies.
*orange07- the shelby splitter will eventually go on the stock GT bumper cover-ONLY with some fabrication and cuttin. You should ask theboss about that- he put it on his GT.
Hey just clarifieing what I want sorry. I want the whole front of the gt500 besides the cobra symbol and hood.I clarify cause I was told 300 are they talking about with paint?
$300.00!!!! You are kidding right...checkout the ebay site below. This seller sells only quality geniune Ford parts.
http://cgi.ebay.com/ebaymotors/2006-2007-MUSTANG-SHELBY-GT500-GT-500-FRONT-END-KIT_W0QQcmdZViewItemQQcategoryZ36475QQihZ014QQitemZ330092165593QQrdZ1QQsspagenameZWD1V
Well that EBAY seller seems to give you a fair deal, compared to the retail prices from FORD on the parts for everything he offers in the kit, he ends up making like 400.00 profit. BUT... thats if he's paying retail for everything then selling it? Which I doubt he's most likely getting it at dealers cost- which in the end, makes about 900-1,000 on each sale!!! And I would imagine a GOOD painter would quote you startin around 300 (if lucky) and up for sprayin, and alot more if your adding the hood also.
How about the black rocker panel molding on the bottom side? Does it come in black or do I just paint mine? (Sorry I didn't answer your question and just added to the subject)
Funny, I called fordparts.com and did you know the black rocker covers are the exact same one's as the v6 mustang!
They are the exact same part number!
They are pretty cheap, only $81 each.
Apex Stang
SuperCoupe
Member
- Feb 6, 2007
- 2
- 1
- 14
Will the Shelby front end line up ok with the GT hood? Does anyone have any pictures of cars with the shelby front and stock GT hood?
SuperCoupe
Member
- Feb 6, 2007
- 2
- 1
- 14
I checked with my dealer today and all these prices were the same for me except the front bumper was more like $550.
LV51FER
New Member
There's a guy here in the UK who's already done this. I'm pretty sure he had to have the GT500 wheel well liners too.
Go to this site http://www.pistonheads.com/gassing/ and click on the Mustangs section and you'll find the thread in there somewhere (not too much traffic here in the UK for Mustangs). I'd post the link but I'm in work and they've just blocked the site.
Go to this site http://www.pistonheads.com/gassing/ and click on the Mustangs section and you'll find the thread in there somewhere (not too much traffic here in the UK for Mustangs). I'd post the link but I'm in work and they've just blocked the site.
LV51FER
New Member
Similar threads
