Dual carb throttle rod question

[bnichols04]

I have 2 edelbrock carbs on my 65 mustang and the throttle rod that connects the petal to the carbs is too long. If someone has a picture of their dual carb setup would help out a great deal thanks all!!

 

[outlaw66]

I am using the Edlebrock 2 X 4 setup on my 66. I used the stock throttle rod, cut it to length, and re-threaded the end that attaches to the accelerator linkage so I could use the stock bushing. Only took a few minutes.

Outlaw66

 

[bnichols04]

the clip that holds the rod to the carb is too small. How did you attach it to the carberators?