yeah i have the same ones and the same kit.
Did you adjust them according to the instructions? Im gonna tell you how i adjusted mine. It works all the time. Some people say to do them differently but i did them Just as the directions say. start at number 1 cylinder and go through fire order. on the cylinder your working on, make sure u are at top dead center ( both intake and exhaust valves will be closed., tighten screw until "very slight" resistance (zero lash). turn 1/2 more turn with wrnech and tighten down. Do both valves before turning cran a quarter turn to do next set in firing orderIf you have a noisy rocker, you may not have tightened it enough. You can find which one doing it and go back and give another slight turn on nut. Describe to me how you adjusted yours. We can work from there
Using only half turn, i did not have to go back and readjust.