It has been awhile since the last update/ post of my FB. The progress has been slow, but I hope the more difficult items are behind me now.
So far this what I have replaced:
Both door skins
Both rear quarters
Drivers side cowl panel
Repaired cowl panel
Mods that are started or near complete:
GW coilover front suspension
Martz Chassis 4-link
MS cobra brake kit
TCP power r&p
TCP motor mounts
Custom subframe conn.
And for the body:
Smooth firewall
Smooth cowl
Smooth antenna
Flush mounted rear taillights
Removed drip rails
Cleaned up alot of the engine bay
What are on the To Do list:
Install doors and fenders
Mock up motor with trans to establish ride height
Build trans crossmember
Get driveshaft cut
Begin building floor and trunk with sheetmetal
Build rotisserie
The list goes on and on...you get the point
I would like to say thanks to this forum and to all members here. If it were not for you all, guys like myself probably would not attemp a backyard build.
Thanks to Mustang Steve for the great product and info.. And thanks to 68FBJJ2109 for the brake hubs.
Here are a few pictures. I got to looking back through all the photos I have taken, and noticed that knowone is in the pictures. Who's the madman behind all of the redundant questions on this site ? Forced my wife to come out to the shop and take a few between coats of primer.
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1797.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1814.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1834.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1818.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=mypiece.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=mypiece2.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1833.jpg
So far this what I have replaced:
Both door skins
Both rear quarters
Drivers side cowl panel
Repaired cowl panel
Mods that are started or near complete:
GW coilover front suspension
Martz Chassis 4-link
MS cobra brake kit
TCP power r&p
TCP motor mounts
Custom subframe conn.
And for the body:
Smooth firewall
Smooth cowl
Smooth antenna
Flush mounted rear taillights
Removed drip rails
Cleaned up alot of the engine bay
What are on the To Do list:
Install doors and fenders
Mock up motor with trans to establish ride height
Build trans crossmember
Get driveshaft cut
Begin building floor and trunk with sheetmetal
Build rotisserie
The list goes on and on...you get the point
I would like to say thanks to this forum and to all members here. If it were not for you all, guys like myself probably would not attemp a backyard build.
Thanks to Mustang Steve for the great product and info.. And thanks to 68FBJJ2109 for the brake hubs.
Here are a few pictures. I got to looking back through all the photos I have taken, and noticed that knowone is in the pictures. Who's the madman behind all of the redundant questions on this site ? Forced my wife to come out to the shop and take a few between coats of primer.
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1797.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1814.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1834.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1818.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=mypiece.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=mypiece2.jpg
http://smg.photobucket.com/albums/v499/lreves/?action=view¤t=IMG_1833.jpg