H/C/I swap need advice

[daviszx3]

i got a stock 90 notch 5speed with a v3 10psi vortech system, with exhaust and 373 gears and no other mods...well i wanna do a head cam and intake swap and need advice what would be a good setup to go with im tryin to stay on the cheap side...but this what i came up with a e303 cam, trick flow track heat intake and 210cc pro comp heads..suggestions welcome please thanks

 

[5.0Droptop]

With boost I would suggest the F cam over the E cam

 

[skunk21]

even though it's out dated the F cam is a good supercharger cam, take a look at the anderson b21 even though it's a little more $$.

 

[daviszx3]

the f cam wouldnt create and clearence issue's would it? also what injectors tb n mass air would u suggest thanks

 

[mustangman9812]

Please tell me you have upgraded the fuel system already? injectors, fuel pump, ect.

 

[daviszx3]

just the fuel pump and using a fmu

 

[mustangman9812]

Thats not good, you need 42lb Injectors 255lph pump at least and i would recommend a t-rex external pump also. Take FMU and throw out in the field. No matter if you have fmu or not car is running lean which is not good at all

 

[skunk21]

the f cam wouldnt create and clearence issue's would it? also what injectors tb n mass air would u suggest thanks

My advice measure..you will probally be okay but it's a really good idea to check ptv. what size rockers/springs you going with? It would really not be a good idea to get into the revs on a motor I didn't check out.