Exhaust tips?

[Z06killinSBF]

Currently have dumps and I am getting tired of the booming. Should I

1) keep the exhaust hidden,
2) Bring tips (3" slant) out under tail panel, or
3) cut out the tail panel and run the tips under that?

View attachment 238600

Examples:

Cut out:

Hidden:

 

[tx65coupe]

I vote for under the valance panel with no trimming.

I don't think that looks good. I do like it on the 67-68 with the factory valance though.

Since you dont have the bumperettes anyway, You could go with the GT valance. If you don't like them hanging down this is the way to do it and would compliment your car very well.

Here is mine with 3 inch stainless slant cut tips under the valance.

 

[chromedog]

ive got 2 1/2" slash cut tips run through the valance, (you can check out the pics on my cardomain page) a modern version of the 65-66 trumpets, imho...

 

[deftsound]

I say leave the dumps!

 

[bcollie67]

I would say don't run them under the bumper, it looks so out of place on that model. I say either leave it like it is or do it right and do the cutouts.

 

[golf4283]

I saw you replace the valence with a GT valence and have the proper exhaust cutouts. I have 3" tips on my '66 with the GT valence and they fit fine. Look even better too and more finished.

 

[gonzothegreat]

Through the rear valance, it's so much better

Here's a video of mine.
<param name="movie" value="http://videos.streetfire.net/flash/SPlayer.swf" type="application/x-shockwave-flash" /><param name="allowScriptAccess" value="always" /><param name="wmode" value="transparent" /><param name="allowfullscreen" value="true" /><param name="FlashVars" value="&video=dd7b26c9-7da8-41ec-be1c-9ac500a51c0f&servicecfg=386" /><embed src="http://videos.streetfire.net/flash/SPlayer.swf" flashvars="video=dd7b26c9-7da8-41ec-be1c-9ac500a51c0f&servicecfg=386" allowfullscreen="true" wmode="transparent" width="428" height="352" allowscriptaccess="always" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" /><br/>

 

[Z06killinSBF]

I HATE through the valance so that is not an option. Sorry to those who like it but it is not for me. Plus my valance is fully molded in.

 

[tx65coupe]

If thats the case then maybe hidden tips are a better choice.

 

[tx65coupe]

If the fact that your valance is fully molded in is the reason you won't go through it, then why would you notch it either.

What do you think you'll go with, under or tucked up and hidden?

 

[Z06killinSBF]

If the fact that your valance is fully molded in is the reason you won't go through it, then why would you notch it either.

What do you think you'll go with, under or tucked up and hidden?

I could trim it with a sheer or the like but, I will probably just keep the tips tucked up in the corners where you can barely see the turn downs.

I just dont want to take and cut a big ole hole in the middle of my panel.

 

[tx65coupe]

I wouldn't run them in the corners. Thats a GM thing. Keep them inside the springs similar to this but tucked up under more.

YouTube - Waldron's Reproduction of the 65 Mustang "Arvinode" exhaust

YouTube - 1965 Ford Mustang V8 Soundcheck