- Nov 28, 2007
- 50
- 0
- 0
Ok, new motor, trans, etc.
New Mallory magnetic dist. (keeping "pink" resistor wire)
Started the car for break in, etc. with a remote starter button.
Car starts and runs fine with remote button.
will not start with key, turns over all day, won't start.
I assume there is some issue with the pink wire, and that is causing my issue, any ideas? I was thinking of trying to start it with a meter on the connection to the ignition, to see if the resistor wire is causing it to be too weak, does this sound like a good test, or could it send me on a wild goose chase?
New Mallory magnetic dist. (keeping "pink" resistor wire)
Started the car for break in, etc. with a remote starter button.
Car starts and runs fine with remote button.
will not start with key, turns over all day, won't start.
I assume there is some issue with the pink wire, and that is causing my issue, any ideas? I was thinking of trying to start it with a meter on the connection to the ignition, to see if the resistor wire is causing it to be too weak, does this sound like a good test, or could it send me on a wild goose chase?