Granada Slotted Rotors
- Thread starter nugget68
- Start date
-
Sponsors (?)
chepsk8
Founding Member
I'm not sure if the rotors are a direct fit onto 68 spindles. Check bearing sizes, race sizes, spindle diameter, etc.
Also remember the Granada rotor has a huge snout, and Mustang wheels from 65-70 will not fit. Magnums are the only ones that will. Aftermarket rims are fine.
Also remember the Granada rotor has a huge snout, and Mustang wheels from 65-70 will not fit. Magnums are the only ones that will. Aftermarket rims are fine.
im running late model 17" mach I wheels...i was looking at this post on ford muscle...
http://www.fordmuscleforums.com/braking-articles/491839-cheap-big-disc-brakes-mustang-falcon.html
331efiblue66
Member
Here is where I got mine
http://www.ebay.com/itm/Ford-Granad...ord|Model:Granada&vxp=mtr&hash=item3a67bd141c
Much better quality than I could have hoped for. I checked them with a mic every 1" when I received them, and they didn't vary more than .0005" thickness all the way around. I didn't put a dial indicator on the edge and check for wobble, but as I said, much better quality than I could have hoped for.
http://www.ebay.com/itm/Ford-Granad...ord|Model:Granada&vxp=mtr&hash=item3a67bd141c
Much better quality than I could have hoped for. I checked them with a mic every 1" when I received them, and they didn't vary more than .0005" thickness all the way around. I didn't put a dial indicator on the edge and check for wobble, but as I said, much better quality than I could have hoped for.
