that's one clean, sexy car man, but I've always wanted a 4 eye and this one was a great deal so I had to grab it. Plus I'm not sure how well the body would hold up to my final plans for the engine. Yours looks amazing though, propsWhy not do a forced induction 351w in a fox vert? Mine came out great! However the B303 cam is not enough remember wild roller cams are mild in a 351w I have an x303 in mine and it is pretty mild.
I'm going to have alot of questions lol. I'll PM you my phone number if you're cool with thatThanks man if you have any question or anything hit me up I'll be happy to give my $.02
any particular place I could find an entire set?I'm partial to Aeromotive fuel systems. I'm running a complete Aeromotive system on my car, from tank to rails and back, and it's supporting over 1000hp, fully streetable.
any particular place I could find an entire set?
Well if you get commission or anything I'll go through you, its nice to help out a fellow enthusiastYou could call us at 561.588.6630 and see if we can order it for you. We're Aeromotive dealers, but we don't stock these. Here's the tank I'm using, and its pretty awesome.
http://aeromotiveinc.com/products-p...6-98-5-eliminator-fox-body-stealth-fuel-tank/
^^I'm actually using that tank with their whole kit, front to back, and it works quite well. (My car ran 155mph through the traps, so around 1000hp) I think for your case (with a carb) they use a different regulator than what I have, but otherwise I believe the kit is very similar. You could call Aeromotive directly and tell them you talked to "Sharad from 5.0 Mustang Magazine" if you want.
Why all forged internals?
They're a waste if you're not going forced induction or nitrous.
You could call us at 561.588.6630 and see if we can order it for you. We're Aeromotive dealers, but we don't stock these. Here's the tank I'm using, and its pretty awesome.
http://aeromotiveinc.com/products-p...6-98-5-eliminator-fox-body-stealth-fuel-tank/
^^I'm actually using that tank with their whole kit, front to back, and it works quite well. (My car ran 155mph through the traps, so around 1000hp) I think for your case (with a carb) they use a different regulator than what I have, but otherwise I believe the kit is very similar. You could call Aeromotive directly and tell them you talked to "Sharad from 5.0 Mustang Magazine" if you want.
Well if you get commission or anything I'll go through you, its nice to help out a fellow enthusiast
Aeromotive makes some really nice stuff! They just spec'd their eliminator pump to run on my car and say it should support the motor well into the 1700hp range for the new xb110 Vortech that we will be testing shortly..
Nope, no commission or anything. I was just trying to help a brother out!
DUDE! Aeromotive has a "Pro" pump. That's what you need for your car. Realistically, the Eliminator is at its limit in my car, and you'll probably have me covered by a few hundred. Also, if you get the Stealth tank like I have, the hat has a -8 Feed & Return. They said it would work on my car, and sure enough, it didn't starve for fuel under load, but I wouldn't use -8 with a 1700hp car either.