Search results

  1. 1

    DYNO RESULTS are in from JLT Cold Air & Predator Tune & Magnaflow Muffler

    Well boys & girls I said I would post up after I did the Tune & Cold Air Kit & Muffler on my wifes V6., Well I am sticking to my word & the results are in from the little 4.0 V6 Automatic Mustang. I am very impressed for what this little thing put down just stock through a 5spd Automatic...
  2. 1

    I bit the Bullet & did Cold Air & Tune

    I ordered the Predator Hand Held Tuner for $350. Then we also ordered the JLT Cold Air Kit Tube & got a stock muffler off a GT. The Car is a Auto V6 4.0 Mustang with the Pony Package I am hoping stock 185 RWHP Then after Cold Air for 193 RWHP Then after we weld up the GT Muffler 203 RWHP...
  3. 1

    Auto's

    What is the Stock RWHP for these? Also are the Auto's Senstive to mods & how well will the trans hold up? My wifes is stock & we took it down the 1/8 & ran a 10.0 @ 69 mph... Is this a bad time for a stock 06 V6 stang.... Full Weight too on a 3/4 tank of gas. I was thinking for adding...
  4. 1

    What is the RWHP for a stock 06 4.2 & what 1/4?

    My ex girlfriend just got a New 06 Mustang & she wants to know some of the first mods she can do to her car to give it some get up & go! Also what does a stock 4.2 put down on the Dyno & what is the sotck 1/4 times? thanks guys!
  5. 1

    Results are in from the TRACK Since adding 4.30s & other mods!

    Yesterday the Bucket ran a new best & busted in the 7s like it was nobodys buissness! I know it's not that big of a deal to some of yall, But I just wanted to share how happy I am about it! My previous best on motor was 8.2 @ 83 mph on motor We installed 4.30s Dropped the AC March Ram...
  6. 1

    How much faster will I go in the 1/8th mile with these new MODS?

    My mods are as follows. Cobra Intake Edelbrock Performer Heads 1.94 & 1.60 Valves E-Cam Mac 1 3/4 Longtube Headers Mac 3inch Pro Chamber H-Pipe Flowmaster 3inch One Chamber Flows Dumped Tremmec 3550 Transmission 24lb Injectors Pro M 75 Mass Air 3.27 gears K&N Air filter on end of Mass...
  7. 1

    2 Questions?

    My mods are as follows. Cobra Intake Edelbrock Performer Heads 1.94 & 1.60 Valves E-Cam Mac 1 3/4 Longtube Headers Mac 3inch Pro Chamber H-Pipe Flowmaster 3inch One Chamber Flows Dumped Tremmec 3550 Transmission 24lb Injectors Pro M 75 Mass Air Just upgraded from 3.27s to 4.30s & got...
  8. 1

    Are these times & mph low or is it just me?

    Took my other Stang out to the 1/8th this past weekend! Timing @16 Degree's Fuel Pressure at 38psi Mods are as follows Cobra Intake E-Cam 1.6 Rockers Edelbrock Performer Heads Mac 3/4 Long tubes Mac 3inch Pro Chamber One Chamber 3inch Dumps Pullys 24lb injecter's Alum DS 3.73s...
  9. 1

    Should I Trade Or Walk Away!

    Guy claims the car will run 10s on the motor! But he was running the car on Methanol & that he put it back on Pump Gas & that it is going to need a smaller Carb to run on Pump Gas! But with 13 1/2 to 1 Compression! I think if I run any Pump gas through it! It is going to have to be at least 110+...
  10. 1

    No Interior lights! PLEASE HELP!!!!

    Well I took the BUCKET out to the Drag strip this weekend & pulled a 1.78 60 ft & al of the sudden the Interior light started flickering on & off down the track! Got back to the pits & tried messing with the light switch & the Interior lights on the Dash & tach would come on if I would put...
Top Bottom
Back
Forums
Menu