Search results

  1. M

    69 Mach 1 351w Head Recommendations

    I have a 66 Mustang that has a 351w from a 69' Mach 1. I am considering going to aluminum heads vs the stock iron heads. Looking for recommendations on brand. I would like 2.02 and 58cc. Engine currently has flat tops with F303 cam. Thanks!
  2. M

    For Sale 1992 Fox Mustang Roller! Was on Pinks! Proven Car! Will Not Last!!! $6,900!!!

    1992 Ford Mustang "Fox" GT roller for sale. Just drop in your engine and trans! Recent brakes, recent street slicks, zero body issues. Was built for the 10.0 index class, but easily upgraded to faster class. Car ran the circuit from Cecil, Atco, Maple Grove, Island and ETown for about 10...
  3. M

    Gas Tank Dynamics

    I tried searching so I apologize if this was asked before. Examining my 2008 GT, I see the gas tank has two chambers that are connected near the very top. The filler neck pours into the driver's side chamber and I noticed a vent on the passenger side chamber. Now is gas only on the driver's...
  4. M

    Looking For 8.8 Bare Rear End Housing - Used

    Anyone? For 2008 GT
  5. M

    2009 Gt500 Rear End Housing Installation

    Does anyone have or know where to find all the torque specs for installing a complete new housing into a 2009 GT500? I am talking about the torque specs for upper/lower control arms bolts, sway bar bolts, panhard bolts, shock bolts, etc... Thanks!
  6. M

    Tore Up Gt500

    Well, close friend of mine took his GT500 09' recently to local drag strip. Car has approximately 650hp to the rear wheels, things I remember are aluminum drive shaft, Steeda lower control arms, Moser axles, eaton tru track, 3.73 gears, Race Stars, Nitto 325x50-15 and some Ford Racing parts for...
  7. M

    High Horsepower Lower Control Arms

    2009 GT500 with about 650hp to rear wheels, what lower control arms recommended? Seems the current ones on the car now are getting crushed to a certain degree and it is gaining clearance.
  8. M

    Failed Inspection - Cycle Time???

    My 2008 GT just failed inspection, NJ. Had Bama tune and took it out about 15 miles before inspection, went to stock tune. Did not realize, two items were "No Ready" and inspector said not enough cycle time. Need some advise here...how long is cycle time? Is it miles, on and off? I just...
  9. M

    AutoMeter Ford Racing Tach Installation

    I did some digging on Google and found out that the AutoMeter Ford Racing Tach needs a Tach Adapter in order to function properly. The hook-up of the Tach Adapter seems pretty straight forward, one needs to tap into the Power/Fuse Panel. I got that figured out. Now, I have to hook up a wire...
  10. M

    Passenger Air Bag Dash Panel

    How does one get that panel off? I need to remove it in order to remove the center air duct dash panel. Thanks!
  11. M

    Ford Racing AutoMeter Tach Install

    Any one install a Ford Racing AutoMeter Tach in 2008 4.6 GT? The instructions only talk about coil and tach output on Electronic Ignition box. This is the green coil wire, where does it tap into? Also, easiest tap in for ignition switch and dash lighting. BTW, just ran car for 1st time...
  12. M

    2008 Mustang GT Rear Gear Lube

    I need to replace my rear cover for support on bearings. Car has 4.10's and is run, don't baby it. I know Ford says 75W 140, some guys are using 75W 90, recommendations? Car is stick, about 425 HP. Also, with using the friction modifier, how many quarts? Thanks.
  13. M

    2008 GT Rear Gear Oil Type

    I need to replace my rear cover for support on bearings. Car has 4.10's and is run, don't baby it. I know Ford says 75W 140, some guys are using 75W 90, recommendations? Car is stick, about 425 HP. Also, with using the friction modifier, how many quarts? Thanks.
  14. M

    S197 4.6 Spark Plug and Coil Pack

    Has anyone noticed how loose the coil pack "spring type" wire is when it goes onto the spark plug end? I have 2008 GT with the early 2 piece plugs and when I pulled one plug out I also removed the coil pack and notice that the fit is generally loose between the coil pack and spark plug "spring...
  15. M

    4.6 3V to 4V Heads

    I have 2008 GT with 4.6 3V, what is recommended upgrade heads for increased performance? I heard 4V heads really wake these cars up. Thanks!
  16. M

    2007 Crappy 2 Piece Spark Plugs

    I know this was talked about in the past, but, it seems some of the posts regarding are quite old, therefore, I want to see input for updates. My GT is 2008, but early with the AA code and 2 piece spark plugs that are prone to issues upon removing. What is the best replacement plug for this...
  17. M

    Aluminum Radiators

    I see all brands of good quality aluminum radiators, increased cooling, but any advantage? I sometimes run the car at the track but debating in my head if an upgrade to aluminum radiator is warranted? Any input is appreciated. :shrug:
  18. M

    S197 GT and GT500 Sway Bar Relocation

    Apparently, on the S197 GT's one needs to relocate the sway bar mounting bracket in order to allow clearance for a 15" rim (cutting off about 1" or so from the existing rear housing bracket and adding a 1/4" metal interface bracket). Is this the case also for the GT500? I believe the rears are...
  19. M

    S197 and NOS

    This has probably been talked about before, if so, please steer me in the right direction. I am looking to NOS a 2008 GT, any one have suggestions, experience or input? Appreciated. Stock motor except for Steeda CAI and tune. Not looking to go crazy, I seen some Systems and it seems like up...
  20. M

    Special Production Forum

    How about in the Special Production section, have "2008/2009 KR" ?
Top Bottom
Back
Forums
Menu