Search results

  1. I

    2001 Cobra PATS 1:6 issue. HELP WMBURNS

    Ive been doing a bunch of reading the past few days and WMBURNS always is the most helpful so Im logging back in after 6 years or so and asking for help. Just purchased this 2001 Cobra as a project so I only know what I can find from searching old thread post from past owners. The car came with...
  2. I

    Need To Replace My Original 40 Series Flowmasters..with What?

    My gt is running an o/r prochamber and original 40 series Flows welded into the stock catback. Well, those Flowmasters are starting to rot and the exhaust has gotten louder and generally worse sounding at idle. Im not sure what mufflers or catback to get though. Id like something a little more...
  3. I

    Prothane Urethane Bushings Front Lca

    Im replacing the bushings on my front LCAs this week. The poly bushings I bought came with new sleeves. Should I have the old sleeves pressed out and replaced with the new ones or just press the new bushings into the old sleeves?
  4. I

    new pics of my gt

    Had the hood painted a few weeks ago. Still need to clean the car and wheels real well when the weather gets nice.
  5. I

    Eibach sway bar kit..opinions

    Tried searching Google and couldnt find anything. Is the kit worth $300? Will I notice any large difference between the stock stuff and this kit? http://www.americanmuscle.com/eibach-swaybar-94-04-mustang.html']http://www.americanmuscle.com/eibach-swaybar-94-04-mustang.html
  6. I

    killed my engine w/ pictures

    Carnage really isnt too bad thank god. Bent a rod and broke some of the piston off. Happened while testing my n2mb wot box and missing a shift. Engine started ticking right after, limped it home and parked it for about a month till I had time to trailer it to the shop. Anyways the engine is...
  7. I

    Just got back from the dyno

    Im happy with the numbers. 13 degrees of timing, 9 psi, 2.2 KB. Dynojet
  8. I

    Cervini's Heat Extractor Hood Pictures

    I couldnt find any pictures before I bought the hood, so here are some for anyone that's interested in the buying the hood. No gap between the bumper and hood. Quality is great and it fits great too. Just had to adjust the hood stops down a bit.
  9. I

    Losing Interest In The Mustang Until...

    I bought this thing! The Saleen S4 was a good kit, but Ill have room to grow with the 2.2
  10. I

    Expired Saleen Series Iv Supercharger Kit W/ Custom Sheetmetal Intake.

    Saleen Series IV kit with custom sheetmetal plenum. Ready to bolt on and go, its still installed if you'd like to see it run first. Asking $3000 shipped for everything I bought the kit last year and installed it back in March. Great blower for a stock 2v. The previous owner made a custom...
  11. I

    Fox Struts Needed For B-springs?

    I just read another thread where someone mentioned fox springs for a lowered car. I have frpp b-springs with no isolators. I have about a 1.5" gap between the tire and fender. Ive noticed the strut will bottom out on larger bumps at higher speeds (they do have 106k miles on them as well) Would...
  12. I

    I done broke something..

    Took the Mustang to this car show today. On the way home I ran through the gears and while going from 2nd to 3rd I heard a noise from the rear of the car. Now when I hit a bump in the road, the rear end feels like its floating or shifting over. Kinda hard to explain. I did a quick look over the...
  13. I

    SVE black Drift wheels on my silver GT

    Just finished up a little while ago. I think they look pretty good for all black. Picked them up brand new for $500 with a new 555 and two used 555R's. Its getting dark so these are all I can get atm.
  14. I

    Blower install thread w /pics

    Alright only one for now. More in the morning, But im in the middle of the install. Everythings off and ive started the install of some stuff. Heat exchanger is on, egr blocked off, maf and iat wires extended, underdrive pulleys removed. Just a bunch of little stuff. The blower is going on...
  15. I

    steeda UDPs mid 01-04

    Steeda underdrive pullies for mid 01-04 2V's. Im putting on my blower this weekend and ill be pulling these off. They'll be ready to ship out Monday. $120 shipped
  16. I

    egr manifold cap

    I'm going to be blocking off my egr when I install my blower. I brought the tube with me to lowes to find a cap. The closest I found that fit was a brass 5/8" flare cap. anyone happen to have the correct size?
  17. I

    iac differences between 99-04

    I need a new iac. LMR list them for 98-00 and 01-04. Any real difference between the two?
  18. I

    Check list for my blower install

    Hoping to get it put on by January. Just a quick list I made up. Anything else I need? Spark plugs (Autolite 103's or AR103s) antifreeze (use the same stuff for the heat exchanger?) oil and filter intake gaskets 180 degree thermostat
  19. I

    re-installing oem pulleys..got a question

    Im going to be installing my blower over winter, so my Steeda UDPs need to come off. How do I re-install the original crank pulley? Do I need to use a starter bolt like I did for the UDPs? Also what size is the stock crank bolt? Im going to put a new one in since I reused the oem one with...
  20. I

    Kenwood Excelon KDC-X891

    In great shape. Comes with everything that came with it new. I only used it for a few months since the car sat for the majority of the time it was in there. Also comes with the iPod usb cord needed to play music through your iPod or iPhone. The dash kit and harness for 01-04 cars is...
Top Bottom
Back
Forums
Menu