Search results

  1. kalvick

    Drivetrain What Kind Of Differential Should I Get?

    hey does anyone have any experience with Torsen or other LSD variants for differential upgrades? I am going to be redoing my gears to get rid of the just awful gear whine from a bad install and I was figuring while it was all apart should I redo the differential? A Torsen is just another 250 or...
  2. kalvick

    used - mach 460 + sub + amp

    Hey, I want to sell off some of my mach 460 setup. Its the complete rear part of the car, under the trunk lid. Its the 6x8 speakers the tweeters, the amps, the complete plastic enclosure for all of it. I also want to sell the 2 tweeters that sit in the enclosures next to the front...
  3. kalvick

    New Haven CT - used shock/strut, springs, strut tower plates

    Hey guys I am selling my 2001 Mustang's used stock suspension parts. When I swapped these parts out for some aftermarket suspension parts the odometer showed approximately 19000 miles. So these are low milage parts. In this package you will receive the stock parts which include, 2...
  4. kalvick

    what are my options for lowering the front of the car?

    I know lowering the back of the car is a snap, I can use Adjustable Lower Control Arms, or do Coil Overs. both options are relatively cheap. But what about the front? How do you lower the car without cutting the springs? the only option I can see is to do coil overs, and if you do that you...
  5. kalvick

    Trickflow TW heads & cams for relatively stock Stang?

    I am seriously thinking about getting some new compcams thumpr cams to get that lopey noise since they are only a few hundred dollars + install. Then I got to thinking why not do it all at once? I am now debating getting Trickflow Twisted Wedge heads since they make a lot of power. For a...
  6. kalvick

    where can I take my stang in CT for mod work?

    Hey all, what is going on with all the Connecticut shops closing? I wanted to get some work done on my Stang. I wanted to get some suspension work done at a place called Elm City Customs, near where I work and they seem to be closed. website's down, and phone is not there. I emailed...
  7. kalvick

    TCI 6x automatic 6 speed transmission

    I saw this in the M&FF Magazine. There is a transmission by TCI for mustangs with automatic transmissions. its a 6 speed tranny, with 2.97, 2.23, 1.57, 1.18, 1.00, 0.75 forward gears. It is called the TCI 6x. Its capable of handling up to 850hp. and supports full manual mode with paddle or...
  8. kalvick

    Exhaust question with Panhard Bar

    I am debating buying the MM Panhard Bar to install on my Stang. The instructions say it will not install without modification to the exhaust, if you do not have a stock setup. I have a Magnaflow catback, it routed the same way as the stock exhaust plumbing. the only thing that is...
  9. kalvick

    I need a new car cover - please recommend

    Well, I was procrastinating long enough and my car cover is just full of holes, dirty and essentially does not work any more. the problem with my current car cover (custom shaped to fit the Stang) is that over time the wind just ripped it apart. the chain that links on the bottom of the...
  10. kalvick

    I bought some suspensions stuff - I want more - what next!?

    I recently got into the idea of doing suspension work to my car because there is TONS of suspension parts I can buy and put in my car, and every year I can spend just a few hundred dollars to have some summer projects without breaking the bank. This year I did the MM F/L subframes, and in...
  11. kalvick

    I need new headliner - Should I stick with stock or go suede?

    All, My headliner in my car is sagging where the roof meets the windshield. I am going to get it repaired this week. the guy that is gonna do the work asked me if I want to spend a little bit more on suede. What do you guys think? should i stick with the stock fabric ceiling headliner or go...
  12. kalvick

    ? about Instrument Cluster Bezel with pod inserts

    Hey, I currently have a 3 pillar gauge pod on my a-pillar. I am getting tired of it taking away from the stock look of my car. i was thinking i want to have only 2 gauges and put them into the instrument cluster pods. here is a pic of what I am talking about Mustang - 01-04 Instrument...
  13. kalvick

    steeda vs maximummotorsports rear sway bars

    I remember way back in 99-2001 era on Stangnet, everyone and their mother would say get the Steeda rear sway bar for a Mustang. After that I never really heard so much of a peep about it. The only thing you really hear about Steeda still is the Tri-ax shifter and the ultra lite wheels...
  14. kalvick

    seatbelts wont retract all they way - how do I get to them to fix?

    Hey Guys My 01 GT, both the passenger and the driver side seat belts dont fully retract when they are not being used. I want to see if the belt got tangled up in the mechanism or if I need to buy a new seatbelt. the thing is I dont know how to get the plastic panel off to get to the...
  15. kalvick

    Need help finding a deal on MM parts

    Hey guys, I want to get some Maximum Motorsports "the starter box" kit (for an 01 gt), and I want MM FL subframes. right now the cheapest way to get them is direct from MM. looking at the forums sponsor websites, im not seeing the kit I want. I would really like to buy from mom and pop...
  16. kalvick

    anyone have sequential tail lights?

    anyone here have sequntial tail lights? i saw them on a 2010 stang and thought it was pretty cool. Also the brake lights are REALLY bright. whats the general concensus about them, ive seen kits to do sequence blinking from $50 (DIY) to $300 (complete kit)? are they cool to have on 99 to...
  17. kalvick

    How to create an extension piece for B&M hammer shifter Auto users

    If you installed a B&M Hammer Shifter on your 99-04 automatic transmission, you will notice that your car can not start from park unless you jam on your shifter several times or start from neutral. this is because the shifter cable is literally millimeters too short to work with the hammer...
  18. kalvick

    b & m hammer shifter - tranmission cable problem

    Hey guys, I installed the B&M hammer shifter last summer, and one of the problems was that the transmission cable linkage is just a tad too short. when the car's shifter is in park, the tranmission is just barely in park. Like its just barely over the line between being in park and being in...
  19. kalvick

    hood bounced when I hit bumps

    Hey guys, I usually drive my 01gt alone, but the other day I had a buddy in the car with me, and he noticed everytime i hit a bump in the road, the car's hood wound wobble. I never noticed this before. when I got to where i was going, I got out, and i tried using my hands and move the...
  20. kalvick

    wiring aftermarket stereo - help?

    hey guys, I bought a new aftermarket stereo for my car, the wiring harness I got I matched up all the cables and crimped them to the cables on the reciever. then there is a second smaller wire harness, the blacks I know go to ground, and the blue and white stripes cables go to the amp...
Top Bottom
Back
Forums
Menu