Search results

  1. C

    What Flywheel?

    There's vibration coming thru my shifter at 3200+ rpm. I think it could be my flywheel. Can I figure out what flywheel I need without taking it out first?
  2. C

    Do MAF and injectors have to match?

    I am about to put some Victor Jr. heads on my '95 Stang. I am thinking replacing my stock 19 lbs. injectors with 36 lbs ones (I hope to turbo someday). I have just been told that I could upgrade my injectors without upgrading the MAF. I just would not see the benefit until I upgrade the...
  3. C

    Distance btw T5 yoke and floorboard of SN95?

    I have a Tremec 3550 in a SN95. It buzzs loudly in 5th gear above 70 mph and at 55 mph in 4th. I been told that the driveshaft angle is different due to the length of the the 3550 compared to the T5. This affects how far the drive shaft inputs into the tranny. I plan to install a spacer kit...
  4. C

    Which to choose? UPR or Magnaflow x-pipe w/cats

    I need new cats for my '95 GT. I'm debating between the Magnaflow X-pipe w/cats and the UPR x-pipe w/cats. UPR has high flow Cats and supposedly better clearance (which I need since my car is lowered). Will they pass the 'sniff test"? Magnaflow is stainless steel (I think?) and should last...
  5. C

    Tri-Ax vs. UPR Bluethunder

    I have a '91 LX with a T5 and a Bluethunder. I love the way it shifts. I have a '95 GT with a Tremec 3550 and a Tri-Axe. I hate the way it shifts. Maybe the difference is more because of the tranny or installation??:shrug: Before I bought either shifter, I always thought that the Tri-Ax...
  6. C

    Buzzing when under a load???

    I have a 95 mustang GT that was converted (by a previous owner) from an automatic to a manual. The tranny, a Tremec 3550, was rebuilt last year. Also installed was a new transmission mount, the clutch and short-throw shifter. The problem is that under load (above 2800 rpm), there is a...
  7. C

    Overheating: How do I check a radiator fan and sending unit?

    I have a SN95 that is beginning to overheat. About 3 weeks ago, I converted to a 160 degree thermo when I had a custom chip installed. The car runs stronger and harder but just a couple of days ago, it erratically began to heat up. It use to be on the 'N' and would rarely move. Now, after a...
  8. C

    What valve cover can I use with Proform roller rockers?

    Need advice. Has anybody used Proform 1.6 Roller Rockers? I just put on a set and they sit high. Stock valve cover won't fit. :bang: It's about 2 1/4 inches high. I'm thinking about putting a 3/8 or 1/2 spacer on the stock intake. Is there a valve cover that's about 2 1/2" high? I also...
  9. C

    Which Valve Cover?

    I have installed new 1.6 roller rockers on my stock heads. Now the valve covers won't fit. Looking for a taller one w/baffles and will fit under the plemum of stock intake. I'm leaning towards either Moroso anozided blue or Milodon. What do you guys recommend? Brand? Aluminum or steel...
  10. C

    '03 Cobra Exhaust- Can it fit?

    A guy I know, just replaced the stock exhaust on his '03 Cobra with a Bassani Cat/back system. He gave me his old exhaust. I just wanted the chrome tips but I'm now wondering if the whole exhaust could fit on a '95 GT? Does anybody know whether they would work? :shrug: Thanks.
Top Bottom
Back
Forums
Menu