Search results

  1. racer_inboston

    Expired Saleen 86' Original Wheels

    I've got a set of 1986 original Saleen Riken wheels. Asking $500 for tge set...Center caps arent included but can be purchased from Riken... Im 40 minutes south of Boston Ma. [email protected] if you're interested. Tkd Wheels are 16" 4 lug And are on craigslist as of now.
  2. racer_inboston

    Saleen 18x9 From 2002 On My 1990 Gt

    Ok fellas, Heres my ordeal...ive got a set of original saleen 18x9. Wheels...currently ive gathered moser 28 spline axles n drums but still have not purchased the lincoln mark 7 rotors....I believe its 1986 front rotors..correct me if im mistaken please.... Anywho, i cannot grasp what is...
  3. racer_inboston

    18x9 saleen wheel dilema !help!

    Ok so i went and bought a used set of saleen oem 18x9 wheels..turns out these are 12mm offset, and 5.3" backspacing. I'm hesitant to do the five lug conversion if these wouldn't work....I did the tirewheel size calculator on Wheel / tire size calculator / comparer - RIMSnTIRES.com and I think...
  4. racer_inboston

    Saleen what offset are my 18x9 saleen wheels?

    Can someone help me with this, its driving me nuts! i have an original equipment set of wheels all the same, 18x9. nothing inside the wheels reveal offset, so i went off and measured the wheel and got the following: Mounting surface to front of lip of wheel: 4.62 inches or 4 5/8" Mounting...
  5. racer_inboston

    looking for a set of 18 or 17 wheels for my fox

    Out of chemo, and ready to keep living my life trusting God, and so I'm getting back to what i love...mustangs .I alsoposted on the corral.....all in all did a budget 5 lug conversion on my 1990 gt, I was looking to get a set of used wheels, 17" or 18" , I like the slaeen 18x9's that everyone...
  6. racer_inboston

    need oxigen sensors for h-pipe

    no job at the moment, so if any of you guys have a set you may want to donate or sell for short cash, please let me know..thanks racer.
  7. racer_inboston

    bbk h-pipe to mac h-pipe

    Greetings my fellow stang-a-neers! Once again, I come to you my friends with question and a scenario. I'm in my thirties and just sent for my 5.0 from my teenage yrs again. My 1990 anivrsary edition gt which I have owned and kept for so many yrs is in need of restoration. My lil brother...
  8. racer_inboston

    1990 fuel return quick disconnet?

    DOes enyone know the part number to this? its the 3ft fuel return 3/16" quick disconnect.
  9. racer_inboston

    saleen basket weave two piece wheels

    These are originall saleen two piece wheels, black center with highly polished deep lip. I have had in my garage for over 20yrs, they came off of my dad's 87 saleen just before they phased in the five spoke, so he took these off at the dealer and put on the five spoke...
  10. racer_inboston

    best replacement fuel pump after 20yrs!!!!

    my 1990 mustang gt: So my fuel pump is dead after 20yrs and 146k.I have minor mods and ran good with stocker pump, so what is a good replacement pump? I know the 88-90 stock pump works hard and its best to slip a 110 in there, but which brand will last? been reading about bosch having the best...
  11. racer_inboston

    '03 mach 1, rear brake pads too thick?

    Hey Gang, My lil brother in TN has been trying to do his brakes and says that the new pads will not fit on the new replacement rotor. He turned the piston in as far as it could go using a rear disc brake turn/press tool, but the new padd seem to be too thick to go on the new rotor, any ideas...
  12. racer_inboston

    7 spoke saleen mustang wheel

    ANyone know the specific alloys in this wheel? its the 2005 -2008 saleen standard wheel.
  13. racer_inboston

    time to replace the stock shocks

    Hey gang, this my custom car that I have built myself over the yrs. I have been running all stock suspension with exeption to 20" rims, 305/35/20 rears and 255/35/20 fronts. It rides beautiful as it is my daily driver and I have put 35k on the clock. I noticed while changing my oil on the lift...
  14. racer_inboston

    climate control out of wack?

    why is it that when I select the the fan on the climate control (blower active with no ac only) to blow fron under my feet, the dash vents at the windshield are also active? there is another selection for the windshield defrost vent so why is it also opening electronically when not being...
  15. racer_inboston

    pre 05 saleen spoiler on an s197?

    Has anyone with autobody knowlede attempted this? I know I can do it, just don't know how it woul dlook and don't have one laying around. I just like the 281 2004 saleen whale tail but wonder how it would look on a 2005+ stang.
  16. racer_inboston

    Center cap size for saleen oem wheels

    DOes anyone know the center cap size for a 05-07 saleen 20" 7 spoke wheel ? Thanks
  17. racer_inboston

    ball joint question, 2005 gt with 20" saleen wheels

    Hey gang, I'm running saleen 20x9 fromts and 20x10 rears. I put these rims/tires with no problem since the car had only 5k miles on it, now i have 35k miles and due to the winter, and the bumpy road to my house (about 1/4 mile) being super bad, I may need balljoints. I never lowered the...
  18. racer_inboston

    tips on upper intake removal, 88f150, 5.0

    I have a used motor that needs the valve cover gaskets done so I need to remove the upper intake plenum. I know that there is a stubborn bold in the middle, anyone know what size or tool is best to remove this? Thanks
  19. racer_inboston

    Can anyone run a vin for me? carfax?

    If anyone has unlimited carfax, would you please run this vin for me? 2ftdf15n8jca89031 Thank you so much!
  20. racer_inboston

    what wrench and socket sizes for headgasket job?

    Hello my fellow stang members! I will be doing the head gaskets on my 1991 f150 (5.0) and would like to know what size wrenches and sockets i need and specs for torq on componets , since I don't own tools anymore so I will be borrowing them from a friend. I have done 2 of these jobs but this...
Top Bottom
Back
Forums
Menu