Search results

  1. Bryce'sStang

    95 Lincoln dohc into a 99 v6

    I have a rusty 95 lincoln, can get a good deal on a 99 v6, how many parts will swap???
  2. Bryce'sStang

    Vibrant red vs Performance red

    Is there a difference, only can performance red with a paint code of es. I want to paint my mirrors tomorrow but need to make sure!!!
  3. Bryce'sStang

    Transmission Questions

    I just bought a '94 Vibrant Red GT. So I am planning on moving my supercharger over to this car. When I take the supercharger off of the 'vert I wanna change my t-5 set up back to a automatic. What other transmission can I use??? I know the Aode will obviously work, but can I get a aod out of...
  4. Bryce'sStang

    Need some help!!!!

    Here is my situation. I have taken my Novi off because I kept on having problems running lean. Well I have got the boost bug again and I am going to install it again. So I decided to put it all together piece by piece. The first thing I have done is take out my stock fuel inj.(24lbs) and...
  5. Bryce'sStang

    Changing back to a stock motor

    Just wondering what you all think I should do. I am putting back in a stock motor into my '94 and was debating on putting a "b" cam I have around and some Cobra 1.7 roller rocker or just put one or the other???
  6. Bryce'sStang

    What should I do with this???

    -------------------------------------------------------------------------------- Here is the deal, I have no idea what is wrong with my peice of crap, I am getting bubbling throught the overflow tank i.e headgaskets again!!! Or so I think. I am done with this motor. Bought my buddies 94...
  7. Bryce'sStang

    Question on putting heads back on??

    I was replacing head gaskets and when I was cleaning the surface of the passenger side I noticed some little divits, I looked closer at it and the cylinder it came off(#4) and the piston had a little something stuck to it, it came right off. The cylinder wall also had a slight line in it, i...
  8. Bryce'sStang

    Battery for all my extra's

    Just wondering if I should run a Optima or a different battery now that I have installed a new MSD btm, 255lph fuel pump, an inline fuel pump, fan mod. It seems that when I have all this on my Volt guage goes way down. The alternator is definately charging it but I haven't even turned on the...
  9. Bryce'sStang

    cooling fan question

    My fan works when I have the "fan mod switch on". It works when I unplug the ect. But will not work on its own or when I turn on the a/c. I do not have any of the a/c hooked up. Does this cause a problem. I have tried 3 different ccrm and they are all the same.
  10. Bryce'sStang

    Is a fluidyne gonna cool me off????

    I have finally got everything up and running again and it runs up to 230-240 range, way to hot for me. I already have a 180* thermostat, a stewart water pump. I knew it would run hotter with the blower but this is out of hand. How much will a fluidyne drop it??? Where is the cheapest place...
  11. Bryce'sStang

    Torque on heads

    I have arp 7/16 head studs that I will be torqueing with 30 weight. Should I torque them all to 80 ft lbs like arp says. Or do they need to be less on the lower studs???? :shrug:
  12. Bryce'sStang

    Serious Problems need help asap

    Just changed head gaskets, for the second time, started the car to run and it ran fine. Let it idle for a bit and changed oil to get rest of the "milk" out of it. Ran it again and more water in the oil, hooked up my radiator pressure tester and pumped it up with the oil plug removed and it...
  13. Bryce'sStang

    Need some help on this cooling issue

    To start off I just got done replacing headgaskets, cam and timing chain and I am still having the same problems I had before. The car will run great at idle and run a long time with out getting hot. Then all of sudden both temp gauges sky rocket. I come to an idle and it will cool down. here...
  14. Bryce'sStang

    Pics of my head gaskets, why?????

    What would of caused this?????
  15. Bryce'sStang

    Which cam for me!!!!

    installed a Novi 2000 this winter and have blown a head gasket. I want to get rid of the B cam and get something that will idle decent. So I have been looking at the Crane 2031 or TFS stage one. Maybe find a stock cam. I have a 95 Cobra motor in there right now. If I lose some hp that is ok...
  16. Bryce'sStang

    What else should I do

    I installed my Novi 2000 over the last couple months and finally had some decent weather to drive the vehicle. For the last couple days I have been have cooling problems when I would get on it a little. Fans turned on and even replaced the ECT. After spending more time on it today I thought I...
  17. Bryce'sStang

    New toy

    Finally gonna get more power!!!!
  18. Bryce'sStang

    What hood would you want????

    I can't decide what hood to get. 1. Heat extractor from mps 2. 2000 Cobra R style hood from Cervinis 3. Cobra R w/ Svo scoop from Kaenen I heard that Kaenen makes the hoods for mps but I don't see it on there website and ordering from Kaenen kind of scares me with there...
  19. Bryce'sStang

    Need some help????

    I can't seem to find any decent help anywhere on the internet except here. So my question has to deal with my 95 F150 with a 351w. I have a high idle sometimes and it stays there. I pull the plug from the IAC and it idles good. Is this the problem. By the way it is speed density!!! Thanks
Top Bottom
Back
Forums
Menu